Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2006, Vol. 13 Issue (6): 387-391    DOI:
    
Software design of flexible developing system for automatic ceramic
powder storing and continuous proportional weighing
 WANG  Wen-Lin
School of Mechanical and Electrical Engineering, Nanchang University, Nanchang 330031, China
Download: HTML     PDF(281KB)
Export: BibTeX | EndNote (RIS)      

Abstract  A flexible developing system for automatic ceramic powder storing and continuous proportional weighing is beneficial for flexible design of its application control systems and achieves time-and-money saving. By means of Siemens WinCC and S7-300 PLC, a flexible developing system was developed via modern industrial Ethernet and Fieldbus technology. Since the upper and lower level computers utilizes a uniform parameter system, this software is convenient to operate and maintain and its control system has favorable intelligence. Moreover, this software is easy to connect into LAN and Internet, which can implement remote monitor and maintenance.

Key words： automatic ceramic powder storing and continuous proportional weighing      flexible developing system      software design      programmable logical controller      control program interface     
Published: 28 May 2006
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
WANG Wen-Lin
Cite this article:

WANG Wen-Lin. Software design of flexible developing system for automatic ceramic
powder storing and continuous proportional weighing. Chinese Journal of Engineering Design, 2006, 13(6): 387-391.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2006/V13/I6/387


陶瓷自动配料柔性开发系统的软件设计

研制陶瓷自动配料的柔性开发系统有利于实现相关大型应用系统的柔性开发，并且可以缩短开发周期、大幅节约开发成本。运用西门子WinCC组态软件和S7-300 PLC，基于现代工业以太网和现场总线控制技术，设计了某陶瓷自动配料柔性开发系统中的控制软件。由于上、下位机使用了统一的变量，其软件操作、维护非常方便，控制系统也表现出良好的智能性。该软件易于和企业局域网或Internet联接，以实现系统的远程监控与维护。

关键词： 陶瓷自动配料,  柔性开发系统,  软件设计,  可编程控制器,  控制界面 
[1] Zheng LI,Xiao-rui LUO,Bo XIE,Xin CAO,He-xu SUN. Design of solar intelligent tracking system based on light intensity perception[J]. Chinese Journal of Engineering Design, 2022, 29(5): 627-633.
[2] SUN Lun-ye, FU Zhi-bo, WANG Long. Design and test of control system for compound feed electrochemical machine tool[J]. Chinese Journal of Engineering Design, 2019, 26(3): 338-345.
[3] GAO Feng, WANG Xin, WU Jun-Qiang, XIONG Li, LIANG Jun. Automatic control system design and realization of latex polymerization process[J]. Chinese Journal of Engineering Design, 2006, 13(6): 377-381.
[4] YAN Gang-Feng, WANG Chen-Luan. Design of embedded control system in computerized flat knitter based on ARM[J]. Chinese Journal of Engineering Design, 2006, 13(2): 104-107.
[5] DIAO Hong-Quan, YAN Gang-Feng. Design of soft start energy-saving controller of asynchronous motor[J]. Chinese Journal of Engineering Design, 2004, 11(3): 155-157.
[6] DIAO Hong-Quan, HU Wei-Xiong, YAN Gang-Feng. Design of electronic jacquard detector system[J]. Chinese Journal of Engineering Design, 2004, 11(2): 93-95.
[7] DIAO Hong-Quan, HU Wei-Xiong, YAN Gang-Feng. Design of five-phase hybrid stepping motor reformatived river based on MCU[J]. Chinese Journal of Engineering Design, 2004, 11(1): 19-22.
[8] DIAO Hong-Quan, ZHANG Yao-Yao, YAN Gang-Feng. Application of MCU interface with floppy disk driver in computerised embroidery machine[J]. Chinese Journal of Engineering Design, 2003, 10(6): 337-340.
[9] ZHU Bin, LIU Jian-Ye. Design of Sight-stabling Action Control Sytem of Helicopter9-2  [J]. Chinese Journal of Engineering Design, 2001, 8(2): 93-95.