Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (4): 83-85    DOI:
    
Measurement System of Axis- straightness Error of Long- Shaft Based on Virtual Instrumental Interface
 YANG  Lian-Gen, LI  Jian-Lin, XIE  Tie-Bang, LI  Zhu
Huangzhou Universit y of Science and Technology ,Wuhan 430074, China
Download: HTML     PDF(142KB)
Export: BibTeX | EndNote (RIS)      

Abstract  A high precise and effective measurement system of axis-straightness error of long-shaft based on virtual instrument interface is discussed in this paper.

Key words： virtual instrument interface      straightness      roundness      microcont roller      missile warhead     
Published: 15 December 2000
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
YANG Lian-Gen
LI Jian-Lin
XIE Tie-Bang
LI Zhu
Cite this article:

YANG Lian-Gen, LI Jian-Lin, XIE Tie-Bang, LI Zhu. Measurement System of Axis- straightness Error of Long- Shaft Based on Virtual Instrumental Interface. Chinese Journal of Engineering Design, 2000, 7(4): 83-85.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I4/83


基于虚拟仪器界面的大轴轴线直线度误差测量系统

提出了一种基于虚拟仪器界面供生产现场使用的高精度、高效率的大轴轴线直线度误差测量系统。

关键词： 虚拟仪器界面,  直线度,  圆度,  单片机,  导弹弹头 
[1] FU Yang, LI Guo-long, XU Kai, TANG Xiao-dong. Evaluation of uncertainty of machine tool roundness error measurement based on multi-source fusion theory[J]. Chinese Journal of Engineering Design, 2021, 28(3): 278-286.
[2] ZHAO Yan-chao, WU Mei-ping, WANG Quan-long, WU Ke-zhong. Optimization of processing parameters for the deep hole straightness of injector[J]. Chinese Journal of Engineering Design, 2018, 25(3): 302-308,314.
[3] MAO Jian, CAO Yan-Long. Evaluation method for spatial straightness errors based on particle swarm optimization[J]. Chinese Journal of Engineering Design, 2006, 13(5): 291-294.
[4] LIU Yu-Sheng. Mathematical model for straightness based on DOF variation[J]. Chinese Journal of Engineering Design, 2002, 9(1): 27-30.
[5] XIONG Feng, GAO Yong-Sheng, LI Zhu. Statistical Tolerance of Roundness and Assessment[J]. Chinese Journal of Engineering Design, 2001, 8(1): 12-16.
[6] WU Yan, GUO Da-Jiang. Preliminary Research on Concentricity and Roundness Error Measurements by Three-coordinates Measuring Machine[J]. Chinese Journal of Engineering Design, 2000, 7(4): 81-82.
[7] DENG Gui-Ling, DUAN Ji-An. A New Algorithm for Evaluating Straightness Error: the Valid Characteristic Point Method with the Rapidly Contracted Constraint Zone[J]. Chinese Journal of Engineering Design, 2000, 7(3): 32-34.