Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (4): 81-82    DOI:
    
Preliminary Research on Concentricity and Roundness Error Measurements by Three-coordinates Measuring Machine
 WU  Yan1, GUO  Da-Jiang2
1.Wux i Mould Factor y,Wux i 214011, China;
2.Jiang nan Instute,Wux i 214063, China
Download: HTML     PDF(80KB)
Export: BibTeX | EndNote (RIS)      

Abstract  On the basis of experience w ith measurement this paper discusses the concent ricity and roundness error measurements by three-coordinates measuring machine from the viewpoint of the author.

Key words： roundness      concent ricity      three-coordinates measuring machine     
Published: 15 December 2000
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
WU Yan
GUO Da-Jiang
Cite this article:

WU Yan, GUO Da-Jiang. Preliminary Research on Concentricity and Roundness Error Measurements by Three-coordinates Measuring Machine. Chinese Journal of Engineering Design, 2000, 7(4): 81-82.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I4/81


三坐标测量机测量圆度同轴度误差初探

本文在测量实践的基础上，对三坐标测量机械测量圆度和同轴度误差进行探讨，论述了作者的看法和改进意见。

关键词： 圆度,  同轴度,  三坐标测量机 
[1] FU Yang, LI Guo-long, XU Kai, TANG Xiao-dong. Evaluation of uncertainty of machine tool roundness error measurement based on multi-source fusion theory[J]. Chinese Journal of Engineering Design, 2021, 28(3): 278-286.
[2] XIONG Feng, GAO Yong-Sheng, LI Zhu. Statistical Tolerance of Roundness and Assessment[J]. Chinese Journal of Engineering Design, 2001, 8(1): 12-16.
[3] YANG Lian-Gen, LI Jian-Lin, XIE Tie-Bang, LI Zhu. Measurement System of Axis- straightness Error of Long- Shaft Based on Virtual Instrumental Interface[J]. Chinese Journal of Engineering Design, 2000, 7(4): 83-85.