Please wait a minute...
Chinese Journal of Engineering Design  2019, Vol. 26 Issue (4): 409-415    DOI: 10.3785/j.issn.1006-754X.2019.04.006
Industrial Design     
Research on evaluation of general aviation aircraft cockpit display interface based on mental workload
ZHANG Ning-ning, FAN Si-cen, WANG Dan-dan, ZOU Yuan-yuan, REN Hong
Department of Industrial Design, Shenyang Aerospace University, Shenyang 110136, China
Download: HTML     PDF(1160KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Pilots need to acquire and process a lot of visual information from the cockpit display interface during flight. A lot of visual information could make the pilot overload the brain, which is easy to cause flight accidents. The influence of the general aviation aircraft display interface on pilots' mental workload was estimated, which provided a basis for the optimization of the design of the general aviation aircraft display interface, reducing the mental load of pilots in the process of flying missions and improving the flight safety. Taking Cessna 172SP as an example, the mental workload of pilots during airfield traffic pattern was evaluated by subjective evaluation, performance evaluation and physiological measurement. Based on the analysis results of subjective scores, flight performance, EEG (Electroencephalogram) indicators and eye movement indicators, the order of mental workload for different flight stages of airfield traffic pattern was obtained. Eye tracking technology was used to locate the interface information that pilots paid attention to in different flight stages. The gaze hot zone that had a greater impact on mental workload in cockpit display interface were determined. It was showed that the pilots' mental workload during the horizontal flight was smaller, and it was larger during the landing flight. The interface side-slip indicator showed the greatest impact on the mental workload. In summary, mental workload measurement combined with eye movement indicators can effectively evaluate the performance of general aviation aircraft display interface.

Received: 27 March 2019      Published: 28 August 2019
CLC:  TH 11  
Cite this article:

ZHANG Ning-ning, FAN Si-cen, WANG Dan-dan, ZOU Yuan-yuan, REN Hong. Research on evaluation of general aviation aircraft cockpit display interface based on mental workload. Chinese Journal of Engineering Design, 2019, 26(4): 409-415.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn.1006-754X.2019.04.006     OR     https://www.zjujournals.com/gcsjxb/Y2019/V26/I4/409


基于脑力负荷的通航飞机座舱显示界面测评研究

在飞行过程中,飞行员需从座舱显示界面获取和处理很多视觉信息,大量的视觉信息会使飞行员脑力负荷过高,从而易导致飞行事故。为降低飞行员在飞行过程中的脑力负荷和提高飞行的安全性,需判断通航飞机座舱显示界面对飞行员脑力负荷的影响,并为通航飞机座舱显示界面优化设计提供依据。以塞斯纳172SP飞机为例,综合应用主观评价法、绩效评估法和生理测量法,对五边飞行过程中飞行员的脑力负荷进行评估。综合主观评分、飞行绩效、脑电(Electroencephalogram, EEG)指标、眼动指标的分析结果,得出了五边飞行不同飞行阶段的脑力负荷大小排序。采用眼动追踪技术对不同飞行阶段飞行员所关注的界面信息进行定位,确定飞机座舱显示界面上对脑力负荷影响较大的注视热区。结果显示飞行员在平飞阶段的脑力负荷较低,降落阶段的脑力负荷较高;显示界面侧滑指示器对脑力负荷的影响最大。综上可知结合脑力负荷测量和眼动指标可以有效地评价通航飞机座舱显示界面的性能。
[1] LIANG Dong, LIANG Zheng-yu, CHANG Bo-yan, QI Yang, XU Zhen-yu. Optimal design of assisting-riveting parallel robot for lifting arm of dobby loom[J]. Chinese Journal of Engineering Design, 2022, 29(1): 28-40.
[2] MA Wei-zhen, HU Teng, ZHENG Hua-ling, LI Tian. Identification of dynamics behavior differentiation characteristics of machine tool tip under spindle running operation[J]. Chinese Journal of Engineering Design, 2021, 28(6): 694-700.
[3] WANG Yong-feng, ZHAO Guo-ru, KONG Xiang-zhan, ZHENG Kai, LI Guang-lin. Design and analysis of unpowered lower-limb exoskeleton with muscle strength synergistic compensation[J]. Chinese Journal of Engineering Design, 2021, 28(6): 764-775.
[4] LI Ran-ran, ZHANG Kai, CHAI Lin, ZHANG Long, LIU Bao-lin, LI Guo-min. Research on control performance of mechanical automatic vertical drilling tool stabilization platform under stick-slip vibration[J]. Chinese Journal of Engineering Design, 2021, 28(6): 746-757.
[5] MAO Jun, TIAN Bo, XIE Miao, LI Yu-qi. Construction and verification of removal model for carbon brush grinding and forming[J]. Chinese Journal of Engineering Design, 2021, 28(6): 701-708.
[6] HE Tao, CHEN Qiang-man, CHEN Guo-yu, WANG Chuan-li, HUANG Sen, SHEN Hao. Research on lubrication and bearing characteristics of variable texture on sliding friction pair surface[J]. Chinese Journal of Engineering Design, 2021, 28(5): 585-593.
[7] WANG Zhi-liang, CHEN Kun, ZHANG Zhen, ZHOU Wang-ming, HUANG He-xiang, XIA Cheng-yu. Study on cuttings carrying principle and numerical simulation analysis of new drill pipe[J]. Chinese Journal of Engineering Design, 2021, 28(5): 602-614.
[8] YU Ru-fei, KOU Xin, CHEN Wei. Simulation analysis of novel surface texture based on CFD[J]. Chinese Journal of Engineering Design, 2021, 28(4): 466-472.
[9] WEI Jian-bao, LI Song-mei, XU Yu-tian. Analysis of torsional vibration characteristics of tripod-ball cage double universal coupling[J]. Chinese Journal of Engineering Design, 2021, 28(4): 458-465.
[10] CHEN Zhi, ZHANG Chun-yan, JIANG Xin-xing, ZHU Jin-yi, LU Chen-hui. Design and analysis of a reconfigurable spatial open/closed chain 6R mobile parallel mechanism[J]. Chinese Journal of Engineering Design, 2021, 28(4): 511-520.
[11] ZHU Jin-yi, ZHANG Chun-yan, LU Chen-hui. Research on singularity of pipeline creeping parallel mechanism based on screw theory[J]. Chinese Journal of Engineering Design, 2021, 28(3): 287-295.
[12] BAI Yang-xi, CHEN Hong-yue, CHEN Hong-yan, WANG Xin, LI Jian-gang. Vibration analysis and experimental verification of shearer sliding shoes based on drum load[J]. Chinese Journal of Engineering Design, 2021, 28(3): 358-366.
[13] ZHENG Ming-jun, ZHAO Chen-lei, WU Wen-jiang, YANG She. Analysis and optimization of all-terrain mobile robot body structure[J]. Chinese Journal of Engineering Design, 2021, 28(2): 195-202.
[14] WANG Xin-yu, PING Xue-liang. Speed control method of mobile robot based on multi-sensor fusion information[J]. Chinese Journal of Engineering Design, 2021, 28(1): 63-71.
[15] BAI Yang-xi, CHEN Hong-yue, CHEN Hong-yan, WANG Xin. Analysis and test verification of transverse vibration of shearer rocker arm under multiple constraints[J]. Chinese Journal of Engineering Design, 2020, 27(6): 707-712.