|
|
|
| Research on a new type of multistage variable diameter stabilizer working mechanism |
| YANG Hang1,2, XIA Cheng-yu1,2, QIAN Li-qin1,2, TU Yi-liu1,2, SUN Qiao-lei1,2, WANG Peng1,2 |
1. School of Mechanical Engineering, Yangtze University, Jingzhou 434023, China;
2. Hubei Engineering Research Center for Oil & Gas Drilling and Completion Tools, Jingzhou 434023, China |
|
|
|
Abstract Since the complicated structure of domestic variable diameter stabilizer and the high manufacturing cost, a new multistage variable diameter stabilizer was designed for fine-tuning horizontal well trajectory. The diameter of stabilizer could achieve multilevel changes by changing the state of the pin in the stroke control wheel guide chute under the control of drilling fluid driving force, and its working principle was introduced in view of its structural characteristics. Based on the theory of vertical and horizontal bending method and considering the combined effect of load and bending moment, a mechanical model of the downhole drilling tool assembly with multistage variable diameter stabilizer was established, the relational expression between the drilling fluid driving force and the length of the stabilizer support block was obtained and the minimum drilling fluid driving force and the drill bit tilt angle in different extension length of the support block were calculated. The results show that the multistage variable diameter stabilizer can realize the function of increasing slope, decreasing slope and stabilizing slope, which can provide technical guidance for the structural design and optimization of multistage variable diameter stabilizers.
|
|
Received: 27 April 2017
Published: 28 December 2017
|
|
|
一种新型多级可变径稳定器工作机理研究
针对目前国内可变径稳定器结构复杂、制造成本高等问题，设计了一种主要用于水平井井眼轨迹微调的新型多级可变径稳定器。该稳定器能在钻井液驱动力作用下通过改变销钉在行程控制轮导向滑槽中的状态来实现多级变径，针对其结构特点，对其工作原理进行了介绍。基于纵横弯曲法理论，并考虑均布载荷及弯矩等因素的联合作用，建立了包含多级可变径稳定器的井下钻具组合的力学模型，得到了钻井液驱动力与稳定器支撑块伸出长度之间的关系式，计算了不同支撑块伸出长度所需最小钻井液驱动力和钻头侧向力的值，结果表明该可变径稳定器能实现增斜、降斜和稳斜功能。研究成果为多级可变径稳定器的结构设计和优化提供了技术指导。
关键词：
可变径稳定器,
行程控制轮,
纵横弯曲法,
井眼轨迹微调,
钻井液驱动力
|
|
| [[1]] |
AL-BALUSHI H,AL-RASHDI M H,AL-SHANDOODI M H, et al. World longest expandable open hole clad & open hole liner with swelling elastomer deployed in Yibal horizontal well[C]//SPE Asia Pacific Drilling Technology Conference, Kuala Lumpur, Malaysia, Sep. 13-15, 2004.
|
|
|
| [[2]] |
祝效华,刘少胡,聂荣国,等.KWQ-216型地面可控井下变径稳定器[J].石油钻采工艺,2011,33(1):120-122. ZHU Xiao-hua, LIU Shao-hu, NIE Rong-guo, et al. KWQ-216 surface controlled downhole variable diameter stabilizer[J]. Oil Drilling & Production Technology, 2011, 33(1):120-122.
|
|
|
| [[3]] |
肖仕红,梁政.旋转导向钻井技术发展现状及展望[J].石油机械,2006,34(4):66-70. XIAO Shi-hong, LIANG Zheng. Development status and prospect of the rotary steerable drilling technology[J]. China Petroleum Machinery, 2006, 34(4):66-70.
|
|
|
| [[4]] |
苏义脑,窦修荣,王家进.变径稳定器及其应用[J].石油钻采工艺,2003,25(3):4-8,81. SU Yi-nao, DOU Xiu-rong, WANG Jia-jin. Variable diameter stabilizer and its application[J]. Oil Drilling & Production Technology, 2003, 25(3):4-8, 81.
|
|
|
| [[5]] |
MARLAND C, BUCHAN J, THAILAND C, et al. Understanding downhole vibration transmission and disruption in Gulf of Thailand[C]//SPE Asia Pacific Oil and Gas Conference, Perth, Australia, Oct. 18-20, 2004.
|
|
|
| [[6]] |
苏义脑.井下控制工程学研究进展[M].北京:石油工业出版社,2001:18-22. SU Yi-nao. Research progress of underground control engineering[M]. Beijing:Petroleum Industry Press, 2001:18-22.
|
|
|
| [[7]] |
MCCORMICK J, OSORIO G, ANDACHI J, et al. Adjustable gauge stabilizer and torque and drag reduction tools reduce over-all drilling times by at least:a case study[C]//SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain, Sep. 25-28, 2011.
|
|
|
| [[8]] |
张玉英,王永宏,邹涌.遥钻井遥控变径稳定器的研制及应用[J].石油矿场机械,2008,37(1):87-89. ZHANG Yu-ying, WANG Yong-hong, ZOU Yong. Development and application of remote control diameter stabilizer in drilling[J]. Oil Field Equipment, 2008, 37(1):87-89.
|
|
|
| [[9]] |
刘英辉,苏义脑,刘旭辉.井眼轨道控制系统中可变径稳定器的发展概况[J].石油机械,2000,28(5):52-53,58. LIU Ying-hui, SU Yi-nao, LIU Xu-hui. Development of variable diameter stabilizer in wellbore orbit control system[J]. China Petroleum Machinery, 2000, 28(5):52-53, 58.
|
|
|
| [[10]] |
余志清.井下闭环可变径稳定器的工作原理及应用研究[J].石油学报,2002,23(3):95-97,9. YU Zhi-qing. Mechanism of controlling borehole trajectory with close-loop adjustable stabilizer at downhole[J]. Acta Petrolei Sinica, 2002, 23(3):95-97, 9.
|
|
|
| [[11]] |
张光伟.井下闭环可变径稳定器的设计计算[J].石油机械,2004,32(2):23-25,41. ZHANG Guang-wei. Design and calculation of downhole close-loop adjustable stabilizers[J]. China Petroleum Machinery, 2004, 32(2):23-25, 41.
|
|
|
| [[12]] |
周志刚.遥控变径稳定器变径动作分析及现场试验[J].石油钻探技术,2015,43(3):120-124. ZHOU Zhi-gang. Analysis and field testing by remote control of the action of a variable diameter stabilizer[J]. Petroleum Drilling Techniques, 2015, 43(3):120-124.
|
|
|
| [[13]] |
夏成宇,王杰,华勇.一种多级可变径稳定器:CN106368621A[P].2017-02-01. XIA Cheng-yu, WANG Jie, HUA Yong. A multi-stage variable diameter stabilizer:CN106368621A[P]. 2017-02-01.
|
|
|
| [[14]] |
唐雪平.变截面(变刚度)纵横弯曲梁[J].力学与实践,1999,12(4):47-50. TANG Xue-ping. Timoshenko beam of variable cross-section (variable stiffness)[J]. Mechanics in Engineering, 1999, 12(4):47-50.
|
|
|
| [[15]] |
唐雪平,苏义脑,陈祖锡.求解中短半径弯螺杆钻具的纵横弯曲法[J].力学与实践,2011,33(3):20-24. TANG Xue-ping, SU Yi-nao, CHEN Zu-xi. Beam-column theory for bent housing pdm assemblies with medium-short radius of building capability[J]. Mechanics in Engineering, 2011, 33(3):20-24.
|
|
|
| [[16]] |
苏义脑,白家祉.用纵横弯曲法对弯接头——井下动力钻具组合的三维分析[J].石油学报,1991,12(3):110-120. SU Yi-nao, BAI Jia-zhi. Three-dimensional analysis of bending joint-downhole dynamic drilling tools by vertical and horizontal bending method[J]. Acta Petrolei Sinica, 1991, 12(3):110-120.
|
|
|
| [[17]] |
卫增杰.中短半径水平井螺杆钻具力学性能分析[D].成都:西南石油学院石油工程学院,2005:23-27. WEI Zeng-jie. Mechanical performance analysis of screw drill with medium and short radial horizontal well[D]. Chengdu:Southwest Petroleum Institute, College of Petroleum Engineering, 2005:23-27.
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
