Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2016, Vol. 23 Issue (5): 506-512    DOI: 10.3785/j.issn.1006-754X.2016.05.015
    
Three-axis force testing scheme design and experimental study of shearer cutter
LI Qiang1, MAO Jun2, ZHANG Ming-yu1, XIE Miao2
1. School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China;
2. College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China
Download: HTML     PDF(2781KB)
Export: BibTeX | EndNote (RIS)      

Abstract  

In order to study the load characteristic of the shearer cutter at working state, the three-axis force testing scheme of shearer cutter was designed, and some related experimental studies were carried on by applying the testing scheme to the shearer of type MG400/930-WD. The curve of three-axis force on the shearer cutter tooth was obtained when the shearer cutter was cutting the laboratory simulation coal wall. And then the experimental results were compared with the theoretical calculation results. Under the influence of the error and random factors, it showed a good agreement between experiment results and theoretical analysis, and verified the feasibility of testing solution. The study can provide experimental data and theoretical basis for enhancing design related parameters of cutting tooth and shearer cutting unit.

Key words： shearer cutter      three-axis force      testing scheme      measuring cutter tooth      experimental study     
Received: 01 July 2015      Published: 28 October 2016
CLC:  TD421  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
LI Qiang
MAO Jun
ZHANG Ming-yu
XIE Miao
Cite this article:

LI Qiang, MAO Jun, ZHANG Ming-yu, XIE Miao. Three-axis force testing scheme design and experimental study of shearer cutter. Chinese Journal of Engineering Design, 2016, 23(5): 506-512.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn.1006-754X.2016.05.015     OR     https://www.zjujournals.com/gcsjxb/Y2016/V23/I5/506


采煤机截齿三向力测试方案设计及实验研究

为研究采煤机工作状态下截齿负载特性，设计了截齿三向力测试方案，并应用该测试方案对MG400/930-WD型采煤机进行了相关实验研究，得到了采煤机截割某实验室模拟煤壁时的截齿三向力曲线，并对实验结果和理论计算结果进行了对比分析.考虑误差和随机因素的影响，可以认为实验结果与理论分析是一致的，验证了测试方案的可行性，能为采煤机截齿相关参数的改进及采煤机截割部的设计提供实验数据和理论依据.


关键词： 采煤机截齿,  三向力,  测试方案,  测量截齿,  实验研究 

[1] 刘送永.采煤机滚筒截割性能及截割系统动力学研究[D].徐州:中国矿业大学机电工程学院,2009:57-58. LIU Song-yong.Research on cutting performance of shearer drum and cutting system dynamics[D].Xuzhou:China University of Mining and Technology, School of Mechatronic Engineering,2009:57-58.
[2] 刘春生.滚筒式采煤机理论设计基础[M].徐州:中国矿业大学出版社,2003:29-40. LIU Chun-sheng.Theoretical design basis of drum shearer[M].Xuzhou:China University of Mining and Technology Press,2003:29-40.
[3] 赵耀军,马思孝,陶云.煤炭截割三向力传感器的研究[J].辽宁工程技术犬学学报(自然科学版),1999,18(1):4-11. ZHAO Yao-jun,MA Si-xiao,TAO Yun.Study on three-axis coal-cutting force sensor[J].Journal of Liaoning Technical University (Natural Science Edition),1999,18(1):4-11.
[4] 马正兰,杜长龙,刘送永,等.采煤机截割载荷检测技术[J].煤炭科学技术,2009,37(11):68-72. MA Zheng-lan,DU Chang-long,LIU Song-yong,et al.Inspection and measurement technology of cutting load for coal shearer[J].Coal Science and Technology,2009,37(11):68-72.
[5] 吕佳佳.煤炭三维截割力传感器的设计与解耦分析[D].淮南:安徽理工大学机械工程学院,2011:25-36. LÜ Jia-jia.Design and decoupling analysis of three-axis coal-cutting force sensor[D].Huainan:Anhui University of Science and Technology,College of Mechanical Engineering, 2011:25-36.
[6] 陈颖.采煤机负载特性及其对截割部可靠性影响研究[D].阜新:辽宁工程技术大学机械工程学院,2011:5-23. CHEN Ying.Research on load characteristic and cutting unit reliability of shearer[D].Fuxin:Liaoning Technical University,College of Mechanical Engineering, 2011:5-23.
[7] 刘送永,杜长龙,崔新霞.采煤机滚筒截齿排列的试验研究[J].中南大学学报(自然科学版),2009,40(5):1281-1287. LIU Song-yong,DU Chang-long,CUI Xin-xia.Experimental research on picks arrangement of shearer drum[J].Journal of Central South University (Science and Technology),2009,40(5):1281-1287.
[8] 刘春生,李德根,戴淑芝.随机载荷对双滚筒采煤机整机力学特性的影响[J].煤矿机电,2012(6):46-48. LIU Chun-sheng,LI De-gen,DAI Shu-zhi.Influence of random load on mechanical properties of double-drum shearer[J].Colliery Mechanical & Electrical Technology,2012(6):46-48.
[9] 谢里阳,孙红春,林贵瑜.机械工程测试技术[M].北京:机械工业出版社,2012:101-115. XIE Li-yang,SUN Hong-chun,LIN Gui-yu.Measurement techniques of mechanic engineering[M].Beijing:China Machine Press,2012:101-115.
[10] 高洪斌,杨兆建.滚筒采煤机负载的波动性分析[J].机械科学与技术,2013,32(7):1054-1059. GAO Hong-bin,YANG Zhao-jian.Analysis on the load fluctuation of roller shearer[J].Mechanical Science and Technology for Aerospace Engineering,2013,32(7):1054-1059.
[11] 王峥荣.采煤机截齿截割过程的动力学仿真[D].太原:太原理工大学机械工程学院,2009:14-32. WANG Zheng-rong.Dynamics simulation of shear's conical pick cutting process[D].Taiyuan:Taiyuan University of Technology,College of Mechanical Engineering, 2009:14-32.
[12] Позин,Е.З.采煤机破煤理论[M].王庆康,门迎春,译.北京:煤炭工业出版社,1992:70-92. Позин,Е.З.Theory of cutting coal for coal mining machine[M].Translated by WANG Qing-kang,MEN Ying-chun.Beijing:China Coal Industry Publishing House,1992:70-92.
[13] TIRYAKI B.In situstudies on service life and pick consumption characteristics of shearerrums[J].Journal of the South African Institute of Mining and Metallurgy,2004,104(2):107-121.
[14] 李晓豁,周洋,刘士君,等.滚筒式采煤机截齿排列参数化设计系统的研究[J].工程设计学报,2014,21(6):550-554. LI Xiao-huo,ZHOU Yang,LIU Shi-jun,et al.Research on parametric design system for pick arrangement on drum shearer[J].Chinese Journal of Engineering Design,2014,21(6):550-554.
[15] ROXBOROUGH F F,PEDRONCELLI E J.Practical evaluation of some coal-cutting theories using a continuous miner[J].The Mining Engineer,1982,142:145-156.
[1] XIONG Wei, GE Zhi-hua, PANG Qiao, LI Man-di, WANG You. Theoretical design and experimental study on interference of hub bearing unit[J]. Chinese Journal of Engineering Design, 2021, 28(1): 41-47.