保质设计 |
|
|
|
|
陶瓷浆料3D打印机挤压力模糊神经网络PID稳定控制研究 |
杨杰( ),彭壮壮,王世杰,马聪,王龙,段国林( ) |
河北工业大学 机械工程学院,天津 300401 |
|
Study on fuzzy neural network PID stability control for extrusion force of ceramic slurry 3D printer |
Jie YANG( ),Zhuang-zhuang PENG,Shi-jie WANG,Cong MA,Long WANG,Guo-lin DUAN( ) |
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300401, China |
引用本文:
杨杰,彭壮壮,王世杰,马聪,王龙,段国林. 陶瓷浆料3D打印机挤压力模糊神经网络PID稳定控制研究[J]. 工程设计学报, 2023, 30(1): 65-72.
Jie YANG,Zhuang-zhuang PENG,Shi-jie WANG,Cong MA,Long WANG,Guo-lin DUAN. Study on fuzzy neural network PID stability control for extrusion force of ceramic slurry 3D printer[J]. Chinese Journal of Engineering Design, 2023, 30(1): 65-72.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2023.00.003
或
https://www.zjujournals.com/gcsjxb/CN/Y2023/V30/I1/65
|
1 |
刘文进,周国相,林坤鹏,等.基于浆料形态的陶瓷3D打印技术的浆料体系研究进展[J].硅酸盐通报,2021, 40(6):1918-1926. LIU Wen-jin, ZHOU Guo-xiang, LIN Kun-peng, et al. Research progress on slurry system of ceramic 3D printing technology based on slurry morphology[J]. Bulletin of the Chinese Ceramic Society, 2021, 40(6): 1918-1926.
|
2 |
CAI Jia-wei, ZHANG Bai-cheng, ZHANG Mao-hang, et al. Indirect 3D printed ceramic: A literature review[J]. Journal of Central South University, 2021(4): 983-1002.
|
3 |
周婧,段国林,卢林,等.陶瓷浆料微流挤压成形关键问题研究[J].中国机械工程,2015,26(22):3097-3102. doi:10.3969/j.issn.1004-132X.2015.22.018 ZHOU Jing, DUAN Guo-lin, LU Lin, et al. Research on several key problems of microflow extrusion forming of ceramic slurry[J]. China Mechanical Engineering, 2015, 26(22): 3097-3102.
doi: 10.3969/j.issn.1004-132X.2015.22.018
|
4 |
NPKA B, DC B, MZA B. Optimization of 3D printing parameters of screw type extrusion (STE) for ceramics using the Taguchi method [J]. Ceramics International, 2019, 45(2): 2351-2360.
|
5 |
刘志鹏.基于微流挤出工艺的3D打印机控制系统研究[D]. 天津:河北工业大学, 2020:43-55. doi:10.13433/j.cnki.1003-8728.20190249 LIU Zhi-peng. Research on 3D printer control system based on microfluidic extrusion process[D]. Tianjin: Hebei University of Technology, 2020: 43-55.
doi: 10.13433/j.cnki.1003-8728.20190249
|
6 |
MASON M S, HUANG T, LANDERS R G, et al. Freeform extrusion of high solids loading ceramic slurries, part I: extrusion process modeling[C]//Seventeenth Annual Solid Freeform Fabrication Symposium, Rolla, Missouri, September 14-16, 2006.
|
7 |
焦盼德,李淑娟,杨磊鹏,等.功能梯度材料快速成形过程建模与控制[J].中国机械工程,2017,28(6):733-738. doi:10.3969/j.issn.1004-132X.2017.06.016 JIAO Pan-de, LI Shu-juan, YANG Lei-peng, et al. Modeling and control of rapid deposition for functionally gradient material components[J]. China Mechanical Engineering, 2017, 28(6): 733-738.
doi: 10.3969/j.issn.1004-132X.2017.06.016
|
8 |
李聪.基于STM32的陶瓷浆料3D打印机控制系统研究[D]. 天津:河北工业大学, 2021:47-55. LI Cong. Research on the control system of ceramic slurry 3D printer based on STM32[D]. Tianjin: Hebei University of Technology, 2021: 47-55.
|
9 |
DIAZ-RODRIGUEZ I D, HAN S, BHATTACHARYYA S P, et al. Bookshelf: analytical design of PID controllers[J]. IEEE Control Systems Magazine, 2021, 41(1): 80-81.
|
10 |
DUTTA P, NAYAK S K. Grey wolf optimizer based PID controller for speed control of BLDC motor[J]. Journal of Electrical Engineering & Technology, 2021(2): 955-961.
|
11 |
AL-DHAIFALLAH M, KANAGARAJ N, NISAR K S. Fuzzy fractional-order PID controller for fractional model of pneumatic pressure system[J]. Mathematical Problems in Engineering, 2018(1): 1-9.
|
12 |
王伟,张晶涛,柴天佑.PID参数先进整定方法综述[J]. 自动化学报,2000(3):347-355. WANG Wei, ZHANG Jing-tao, CHAI Tian-you. A survey of advanced PID parameters turning methods[J]. Acta Automatica Sinica, 2000(3): 347-355.
|
13 |
肖亚宁,孙雪,郭艳玲,等.基于BP-PID的选择性激光烧结温度控制系统设计[J].机床与液压,2021,49(24): 95-100. doi:10.3969/j.issn.1001-3881.2021.24.019 XIAO Ya-ning, SUN Xue, GUO Yan-ling, et al. Design of temperature control system based on BP-PID for selective laser sintering[J]. Machine Tool & Hydraulics, 2021, 49(24): 95-100.
doi: 10.3969/j.issn.1001-3881.2021.24.019
|
14 |
罗昌恩,张国林,戴毅.基于STM32小型四轴飞行器PID参数整定[J].电子世界,2018(19):37-38. LUO Chang-en, ZHANG Guo-lin, DAI Yi. PID parameter tuning based on STM32 small quadcopter[J]. Electronics World, 2018(19): 37-38.
|
15 |
陈星.基于模糊神经网络PID控制的花茶烘焙温控系统设计[J].食品与机械,2020,36(9):131-137. CHEN Xing. Design of tea baking temperature control system based on fuzzy neural network PID control[J]. Food & Machinery, 2020, 36(9): 131-137.
|
16 |
郭佳跃,韦根原.基于自适应神经网络模糊PID的磨煤机控制研究[J].热能动力工程,2022,37(2):148-154. GUO Jia-yue, WEI Gen-yuan. Research on coal mill control based on adaptive neural network fuzzy PID[J]. Journal of Engineering for Thermal Energy and Power, 2022, 37(2): 148-154.
|
17 |
DAVANIPOUR M, JAVANMARDI H, GOODARZI N. Chaotic self-tuning PID controller based on fuzzy wavelet neural network model[J]. Iranian Journal of Science and Technology, Transactions of Electrical Engineering, 2018(3): 357-366.
|
18 |
PARK D, LE T L, QUYNH N V, et al. Online tuning of PID controller using a multilayer fuzzy neural network design for quadcopter attitude tracking control[J]. Frontiers in Neurorobotics, 2021,14: 619350.
|
19 |
杨艺,虎恩典.基于S函数的BP神经网络PID控制器及Simulink仿真[J].电子设计工程,2014,22(4):29-31. doi:10.3969/j.issn.1674-6236.2014.04.009 YANG Yi, HU En-dian. Simulink simulation of BP neural network PID controller based on S-function[J]. Electronic Design Engineering,2014,22(4):29-31.
doi: 10.3969/j.issn.1674-6236.2014.04.009
|
20 |
李绍铭,赵伟.基于S函数的RBF神经网络PID控制器Simulink仿真[J]. 安徽冶金科技职业学院学报,2008(1): 19-21. doi:10.3969/j.issn.1672-9994.2008.01.007 LI Shao-ming, ZHAO Wei. Simulink simulation of RBF network PID controlle based on S-function [J]. Journal of Anhui Vocational College of Metallurgy and Technology, 2008(1): 19-21.
doi: 10.3969/j.issn.1672-9994.2008.01.007
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|