保质设计 |
|
|
|
|
螺栓与被连接件间轴向相对刚度的修正计算 |
柯新, 阳光武, 夏冬, 肖守讷 |
西南交通大学 牵引动力国家重点实验室, 四川 成都 610031 |
|
Modified calculation of axial relative stiffness between bolt and connected parts |
KE Xin, YANG Guang-wu, XIA Dong, XIAO Shou-ne |
State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031, China |
引用本文:
柯新, 阳光武, 夏冬, 肖守讷. 螺栓与被连接件间轴向相对刚度的修正计算[J]. 工程设计学报, 2019, 26(1): 39-46,109.
KE Xin, YANG Guang-wu, XIA Dong, XIAO Shou-ne. Modified calculation of axial relative stiffness between bolt and connected parts. Chinese Journal of Engineering Design, 2019, 26(1): 39-46,109.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2019.01.006
或
https://www.zjujournals.com/gcsjxb/CN/Y2019/V26/I1/39
|
[1] SAWA T, MARUYAMA K. On the deformation of the bolt head and nut in a bolted joint[J]. JSME International Journal, 2008, 19(128):1917-1925.
[2] Verein Deutscher Ingenieure. Systematic calculation of high duty bolted joints, joints with one cylindrical bolt[M]. Berlin:Beuth Verlag, 2003, 27-43.
[3] BICKFORD J H. An introduction to the design and behavior of bolted joints[J]. Journal of Testing & Evaluation, 1995, 19(5):94-96.
[4] WILEMAN J, CHOUDHURY M, GREEN I. Computation of member stiffness in bolted connections[J]. Journal of Mechanical Design, 1991, 113(4):432-437.
[5] MARUYAMA K. Stress analysis of a bolt-nut joint by the finite element method and the copper-electroplating method-3, influence of pitch error or flank angle error[J]. JSME International Journal, 2008, 19(130):2292-2302.
[6] MOTOSH N. Determination of joint stiffness in bolted connections[J]. Journal of Engineering for Industry, 1976, 98(3):858.
[7] RÖTSCHER F. Die Maschinenelemente:ein lehr-und handbuch für studierende, konstrukteure und ingenieure:Band 1[M]. Berlin:Springer-Verlag, 1927:1-600. RÖTSCHER F. Machine elements:teaching and manual for sstudents, designers and engineers:Volume 1[M]. Berlin:Springer-Verlag, 1927:1-600.
[8] NASSAR S A, ABBOUND A. An improved stiffness model for bolted joints[J]. Journal of Mechanical Design, 2009, 131:(121001-1)-(121001-11).
[9] 杨国庆,王飞,洪军,等.螺栓被连接件刚度理论的计算方法[J].西安交通大学学报,2012,46(7):50-56. YANG Guo-qing, WANG Fei, HONG Jun, et al. Theoretical analysis for bolted member stiffness[J]. Journal of Xi'an Jiaotong University, 2012, 46(7):50-56.
[10] 中国铁道科学研究院.钢结构用高强度大六角头螺栓:GB/T 1228-2006[S].北京:中国标准出版社,2006:4-5. China Academy of Railway Sciences. High strength bolts with large hexagon head for steel structures:GB/T 1228-2006[S]. Beijing:Standards Press of China, 2006:4-5.
[11] 中国铁道科学研究院.钢结构用高强度大六角螺母:GB/T 1229-2006[S].北京:中国标准出版社,2006:4-5. China Academy of Railway Sciences. High strength large hexagon nuts for steel structures:GB/T 1229-2006[S]. Beijing:Standards Press of China, 2006:4-5.
[12] 中冶建筑研究总院有限公司.钢结构高强度螺栓连接技术规程:JGJ82-2011[S].北京:中国建筑工业出版社,2011:13. Central Research Institute of Building and Construction Co., Ltd.. Technical specification for high strength bolt connections of steel structures:JGJ82-2011[S]. Beijing:China Architecture & Building Press, 2011:13.
[13] 夏冬.螺栓连接载荷导入系数问题研究[D].成都:西南交通大学牵引动力国家重点实验室,2018:31-36. XIA Dong. Research on load introduction factor problems of bolted joints[D]. Chengdu:Southwest Jiaotong University, State Key Laboratory of Traction Power, 2018:31-36.
[14] 刘建华.轴向激励下螺栓连接结构的松动机理研究[D].成都:西南交通大学摩擦学研究所,2016:84-85. LIU Jian-hua. Research on the self-loosening mechanism of bolted joints under axial excitation[D]. Chengdu:Southwest Jiaotong University, Tribology Research Institute, 2016:84-85.
[15] 李会勋,胡迎春,张建中.利用ANSYS模拟螺栓预紧力的研究[J].山东科技大学学报,2006,25(1):57-59. LI Hui-xun, HU Ying-chun, ZHANG Jian-zhong. Simulation of preload of bolted joints with ANSYS[J]. Journal of Shandong University of Science and Technology, 2006, 25(1):57-59.
[16] 叶奇,胡伟平,孟庆春.基于ANSYS受剪螺栓预紧力处理方法研究[C]//北京力学会第20届学术年会,北京:北京力学会,2014:264-265. YE Qi, HU Wei-ping, MENG Qing-chun. Research on method of preload of shear bolts based on ANSYS[C]//The 20th Annual Conference of the Beijing Mechanics Association,Beijing:Beijing Mechanics Association, 2014:264-265.
[17] PAI N G, HESS D P. Experimental study of loosening of threaded fasteners due to dynamic shear loads[J]. Journal of Sound and Vibration 2002, 253(3):585-602.
[18] 向福腾.螺栓连接件等效压缩刚度计算方法研究[D].成都:西南交通大学牵引动力国家重点实验室,2016:15-31. XIANG Fu-teng. Study on calculation method of equivalent compression stiffness of bolted joints[D]. Chengdu:Southwest Jiaotong University, State Key Laboratory of Traction Power, 2016:15-31. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|