| 整机和系统设计 |
|
|
|
|
| 采煤机截齿三向力测试方案设计及实验研究 |
| 李强1, 毛君2, 张明玉1, 谢苗2 |
1. 宿州学院 机械与电子工程学院, 安徽 宿州 234000;
2. 辽宁工程技术大学 机械工程学院, 辽宁 阜新 123000 |
|
| Three-axis force testing scheme design and experimental study of shearer cutter |
| LI Qiang1, MAO Jun2, ZHANG Ming-yu1, XIE Miao2 |
1. School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China;
2. College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China |
引用本文:
李强, 毛君, 张明玉, 谢苗. 采煤机截齿三向力测试方案设计及实验研究[J]. 工程设计学报, 2016, 23(5): 506-512.
LI Qiang, MAO Jun, ZHANG Ming-yu, XIE Miao. Three-axis force testing scheme design and experimental study of shearer cutter. Chinese Journal of Engineering Design, 2016, 23(5): 506-512.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.05.015
或
https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I5/506
|
| [1] 刘送永.采煤机滚筒截割性能及截割系统动力学研究[D].徐州:中国矿业大学机电工程学院,2009:57-58. LIU Song-yong.Research on cutting performance of shearer drum and cutting system dynamics[D].Xuzhou:China University of Mining and Technology, School of Mechatronic Engineering,2009:57-58.
[2] 刘春生.滚筒式采煤机理论设计基础[M].徐州:中国矿业大学出版社,2003:29-40. LIU Chun-sheng.Theoretical design basis of drum shearer[M].Xuzhou:China University of Mining and Technology Press,2003:29-40.
[3] 赵耀军,马思孝,陶云.煤炭截割三向力传感器的研究[J].辽宁工程技术犬学学报(自然科学版),1999,18(1):4-11. ZHAO Yao-jun,MA Si-xiao,TAO Yun.Study on three-axis coal-cutting force sensor[J].Journal of Liaoning Technical University (Natural Science Edition),1999,18(1):4-11.
[4] 马正兰,杜长龙,刘送永,等.采煤机截割载荷检测技术[J].煤炭科学技术,2009,37(11):68-72. MA Zheng-lan,DU Chang-long,LIU Song-yong,et al.Inspection and measurement technology of cutting load for coal shearer[J].Coal Science and Technology,2009,37(11):68-72.
[5] 吕佳佳.煤炭三维截割力传感器的设计与解耦分析[D].淮南:安徽理工大学机械工程学院,2011:25-36. LÜ Jia-jia.Design and decoupling analysis of three-axis coal-cutting force sensor[D].Huainan:Anhui University of Science and Technology,College of Mechanical Engineering, 2011:25-36.
[6] 陈颖.采煤机负载特性及其对截割部可靠性影响研究[D].阜新:辽宁工程技术大学机械工程学院,2011:5-23. CHEN Ying.Research on load characteristic and cutting unit reliability of shearer[D].Fuxin:Liaoning Technical University,College of Mechanical Engineering, 2011:5-23.
[7] 刘送永,杜长龙,崔新霞.采煤机滚筒截齿排列的试验研究[J].中南大学学报(自然科学版),2009,40(5):1281-1287. LIU Song-yong,DU Chang-long,CUI Xin-xia.Experimental research on picks arrangement of shearer drum[J].Journal of Central South University (Science and Technology),2009,40(5):1281-1287.
[8] 刘春生,李德根,戴淑芝.随机载荷对双滚筒采煤机整机力学特性的影响[J].煤矿机电,2012(6):46-48. LIU Chun-sheng,LI De-gen,DAI Shu-zhi.Influence of random load on mechanical properties of double-drum shearer[J].Colliery Mechanical & Electrical Technology,2012(6):46-48.
[9] 谢里阳,孙红春,林贵瑜.机械工程测试技术[M].北京:机械工业出版社,2012:101-115. XIE Li-yang,SUN Hong-chun,LIN Gui-yu.Measurement techniques of mechanic engineering[M].Beijing:China Machine Press,2012:101-115.
[10] 高洪斌,杨兆建.滚筒采煤机负载的波动性分析[J].机械科学与技术,2013,32(7):1054-1059. GAO Hong-bin,YANG Zhao-jian.Analysis on the load fluctuation of roller shearer[J].Mechanical Science and Technology for Aerospace Engineering,2013,32(7):1054-1059.
[11] 王峥荣.采煤机截齿截割过程的动力学仿真[D].太原:太原理工大学机械工程学院,2009:14-32. WANG Zheng-rong.Dynamics simulation of shear's conical pick cutting process[D].Taiyuan:Taiyuan University of Technology,College of Mechanical Engineering, 2009:14-32.
[12] Позин,Е.З.采煤机破煤理论[M].王庆康,门迎春,译.北京:煤炭工业出版社,1992:70-92. Позин,Е.З.Theory of cutting coal for coal mining machine[M].Translated by WANG Qing-kang,MEN Ying-chun.Beijing:China Coal Industry Publishing House,1992:70-92.
[13] TIRYAKI B.In situstudies on service life and pick consumption characteristics of shearerrums[J].Journal of the South African Institute of Mining and Metallurgy,2004,104(2):107-121.
[14] 李晓豁,周洋,刘士君,等.滚筒式采煤机截齿排列参数化设计系统的研究[J].工程设计学报,2014,21(6):550-554. LI Xiao-huo,ZHOU Yang,LIU Shi-jun,et al.Research on parametric design system for pick arrangement on drum shearer[J].Chinese Journal of Engineering Design,2014,21(6):550-554.
[15] ROXBOROUGH F F,PEDRONCELLI E J.Practical evaluation of some coal-cutting theories using a continuous miner[J].The Mining Engineer,1982,142:145-156. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
