Please wait a minute...
工程设计学报
工程设计学报  2013, Vol. 20 Issue (5): 409-413    
工程设计理论、方法与技术     
含运动副间隙的平面函数机构运动点可靠性分析
 邹文韬, 王志刚, 张均富
西华大学 机械工程与自动化学院, 四川 成都 610039
Point kinematics reliability of planar function mechanisms with joint clearance
 ZOU  Wen-Tao, WANG  Zhi-Gang, ZHANG  Jun-Fu
School of Mechanical Engineering & Automation， Xihua University， Chengdu 610039， China
 全文: PDF(1167 KB)   HTML
摘要： 运动副间隙是影响机构运动与动力性能的一类最重要的不确定性.为精确估计含运动副间隙的机构运动可靠度，建立机构运动间隙合理、有效的概率模型是关键．为此，以含运动副间隙的函数生成机构为例，在其运动误差函数中综合考虑机构的结构误差和随机误差，应用截尾混合降维法对运动副间隙变量进行处理并建立机构运动误差的概率等效模型，采用一次二阶矩法实现等效模型的求解．数值实例验证了截尾混合降维法在考虑结构误差和随机误差含运动副间隙的函数机构运动可靠性分析中的有效性．
关键词： 运动可靠度;  函数机构;  运动副间隙    
Abstract: Joint clearance is the most important uncertainty to affect on kinematic and dynamic performance of mechanisms. To accurately evaluate the kinematic reliability of mechanisms with joint clearance， the key is to create reasonable and effective probabilistic model of joint clearance. Taking the function generator mechanisms with joint clearance for example， the structure error and random error were considered to create the motion error function of mechanisms. The Cut Hybrid Dimension Reduction Method was applied to handle the correlation of joint clearance variables and then the equivalent probabilistic model of motion error was established. The First Order and Second Moment method was used to solve the point kinematic reliability of the mechanisms. The results show that the Cut Hybrid Dimension Reduction Method is validation for solving kinematic reliability of planar function mechanisms with joint clearance when the structure error and random error are considered．
Key words: kinematic reliability    function mechanisms    joint clearance
出版日期: 2013-10-28
基金资助:

国家自然科学基金资助项目(51275425)；教育部“春晖计划”资助项目（z2011081）．
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
邹文韬
王志刚
张均富

引用本文:

邹文韬, 王志刚, 张均富. 含运动副间隙的平面函数机构运动点可靠性分析[J]. 工程设计学报, 2013, 20(5): 409-413.

ZOU Wen-Tao, WANG Zhi-Gang, ZHANG Jun-Fu. Point kinematics reliability of planar function mechanisms with joint clearance. Chinese Journal of Engineering Design, 2013, 20(5): 409-413.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I5/409

No related articles found!