Please wait a minute...
工程设计学报
工程设计学报  2013, Vol. 20 Issue (4): 332-337    
工程设计理论、方法与技术     
基于Pro/E模型的MATLAB/Simulink模型转换
 方孝健, 陈钢, 陈立平
华中科技大学 机械科学与工程学院，湖北 武汉 430074
Study on an approach of transformation based on the Pro/E model to MATLAB/Simulink model
 FANG  Xiao-Jian, CHEN  Gang, CHEN  Li-Ping
School of Mechanical Science and Engineering， Huazhong University of Science and Technology， Wuhan 430074， China
 全文: PDF(731 KB)   HTML
摘要： Pro/E模型与MATLAB/Simulink模型表达方式的不一致直接影响了两者间进行联合仿真.从Pro/E装配模型到MATLAB/Simulink模型的转换分为装配模型信息的提取和接口信息转换两部分内容；前者采用的是基于特征设计技术和分层、分类的方法来提取信息的，而后者是把.xml作为中性文件将信息从Pro/E到MATLAB/Simulink间进行映射.其中后者还涉及Pro/E装配模型的约束关系到机构间运动副的转换，采用的是基于约束度的组合推理算法实现简单约束转运动副，并对螺旋法转运动副进行了理论研究.最后用转换挖掘机实例证实了上述研究方法的可行性，解决了利用 Pro/E 和 MATLAB/Simulink进行联合仿真所遇到的相关技术性问题.
关键词： 模型表达;  信息提取;  模型转换;  约束转运动副    
Abstract: The different expressions between Pro/E model and MATLAB/Simulink model affect directly cosimulation. The process of transferring the Pro/E assembly model to MATLAB/Simulink model was divided into two sections: extraction of the assembly model information and transformation of the interface information. The realization of the former was based on feature design technology and hierarchical classification， the latter took .xml as a neutral file and mapped information from Pro/E to MATLAB/Simulink. Transforming constraints of the Pro/E assembly model into kinematic pair of the mechanism was the key point. The process used compositional reasoning algorithm based on the degree of constraint to realize the transformation， and studied spiral theory about transforming constraints into kinematic pair. Finally，the experiment based on the excavator confirmed the feasibility of the research technique. The proposed method has solved the related technological problems when the united simulation is carried out by Pro/E and MATLAB/Simulink．
Key words: model representation    information extraction    model transformation    transform constraints into kinematic pair
出版日期: 2013-08-28
基金资助:

国家高技术研究发展计划（863计划）资助项目(2006AA04Z121).
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
方孝健
陈钢
陈立平

引用本文:

方孝健, 陈钢, 陈立平. 基于Pro/E模型的MATLAB/Simulink模型转换[J]. 工程设计学报, 2013, 20(4): 332-337.

FANG Xiao-Jian, CHEN Gang, CHEN Li-Ping. Study on an approach of transformation based on the Pro/E model to MATLAB/Simulink model. Chinese Journal of Engineering Design, 2013, 20(4): 332-337.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I4/332

No related articles found!