Please wait a minute...
工程设计学报
工程设计学报  2004, Vol. 11 Issue (1): 16-18    
工程设计理论、方法与技术     
简易扭转疲劳试验机的开发研究
 曾纪杰, 赵稳
湖南理工学院机电系，湖南 岳阳 41400
Advanced development for facility torsion fatigue tester
 ZENG  Ji-Jie, ZHAO  Wen
Department of Mechatronics, Hunan Institute of Science and Technology, Yueyang 414000, China
 全文: PDF(164 KB)   HTML
摘要： 将磁粉离合器应用于扭转疲劳试验机中，实现了加载扭矩的无级调节与控制.分析了无级加载扭转疲劳试验机的工作原理，介绍了该试验机的主要用途卜通过现场标定，加载扭矩的误差不超过3%.
关键词： 扭转疲劳极限;  扭转疲劳试验机;  磁粉离合器    
Abstract: It is a new idea to use magnetic particle clutch in the design for torsion fatigue tester. The load of tester can be adjusted and controlled. The paper gives operating principle of torsion fatigue tester and recommends its application. Error of tester torque is not more than 3% by testing made with torsion fatigue tester.
Key words: fatigue limit for torsion    torsion fatigue tester    magnetic particle clutch
出版日期: 2004-02-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
曾纪杰
赵稳

引用本文:

曾纪杰, 赵稳. 简易扭转疲劳试验机的开发研究[J]. 工程设计学报, 2004, 11(1): 16-18.

ZENG Ji-Jie, ZHAO Wen. Advanced development for facility torsion fatigue tester[J]. Chinese Journal of Engineering Design, 2004, 11(1): 16-18.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2004/V11/I1/16

No related articles found!