Please wait a minute...
工程设计学报  2015, Vol. 22 Issue (3): 290-294    DOI: 10.3785/j.issn. 1006-754X.2015.03.014
通用零部件设计     
毛刷电接触对的插拔力研究
梁云忠1,乔玉鹏1,金  波2,伍  权1,徐卫平1
1.贵州师范大学 机械与电气工程学院,贵州 贵阳 550001;2.中航工业贵州红林机械有限公司,贵州 贵阳 550001
Study on insertion-extraction force of the brush electrical contact
LIANG Yun-zhong1, QIAO Yu-peng1,JIN Bo2 ,WU Quan1,XU Wei-ping1
1.Department of Mechanical and Electrical Engineering, Guizhou Normal University, Guiyang 550001, China;
2.Guizhou Honglin Machinery Co., Ltd., Aviation Industry of China, Guiyang 550001, China
 全文: PDF(1378 KB)   HTML
摘要: 针对现有毛刷电接触对插拔力控制方法的缺乏,提出了基于插拔深度控制毛刷电接触对插拔力的方法,在插拔过程中建立毛刷电接触对的结构力学模型和有限元仿真模型,并对毛刷电接触对进行插入力试验.将结构力学模型、有限元仿真模型、插拔力试验所得的插入力随插入深度变化曲线进行对比分析,评估了随机插合等因素对结构力学模型的影响,进行了线簧孔、麻花针和毛刷电接触对在不同插拔深度的插拔力对比试验.结果表明,毛刷电接触对插入力大小与插拔深度成幂函数关系,当典型毛刷电接触对插拔深度为1.8~2.4 mm时,插拔力明显较同规格线簧孔、麻花针电接触对的小.基于插拔深度控制插拔力的方法为毛刷电接触对系列化扩展及参数设计提供了一定的参考.
关键词: 毛刷电接触插拔力结构力学模型有限元模型插拔深度连接器    
Abstract: In order to solve the current problem which is the lack of insertion-extraction force control method for brush electrical contact, the method based on the insertion depth was put forward. The structural mechanics model and the finite element model in the insertion-extraction process of the brush electrical contact were constructed, and the insertion force test on the brush electrical contact was done. The comparative analyses of curves of the insertion-extraction force varying with the insertion depth of the structural mechanics analysis model, the finite element model and test data were performed. The influences of random inserting and other factors on the structural mechanics model were assessed, the insertion-extraction force in different insertion depth of the brush electrical contact and the spring wire socket electrical contact and twist-pin electrical contact were carried out. The results showed that the insertion force of brush electrical contact and the insertion depth followed the power function relationship. When the insertion depth was in the range of 1.8-2.4 mm, the typical brush electrical contact insertion-extraction force was significantly smaller than the same specifications spring wire socket and twist-pin electrical contact. The method of controlling insertion-extraction force based on the insertion depth can provide a certain reference on the series expansion and parameter design of brush electric contact.
Key words: brush electric contact    insertion-extraction force    structural mechanics analysis model    finite element model    insertion-extraction depth    connector
收稿日期: 2014-11-03 出版日期: 2015-06-28
基金资助:

贵州省自然科学基金资助项目(黔科合J字〔2014〕2133号).

作者简介: 梁云忠(1984—),男,贵州仁怀人,讲师,硕士,从事电接触理论和电连接器设计研究,E-mail: 290263424@qq.com. 乔玉鹏(1972—),男,辽宁本溪人,副教授,博士,从事精密加工研究,E-mail: qypdlut@163.com.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

梁云忠,乔玉鹏,金 波,伍 权,徐卫平. 毛刷电接触对的插拔力研究[J]. 工程设计学报, 2015, 22(3): 290-294.

LIANG Yun-zhong,QIAO Yu-peng,JIN Bo ,WU Quan,XU Wei-ping. Study on insertion-extraction force of the brush electrical contact. Chinese Journal of Engineering Design, 2015, 22(3): 290-294.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2015.03.014        https://www.zjujournals.com/gcsjxb/CN/Y2015/V22/I3/290

[1] 骆燕燕, 潘晓松, 马旋, 武雄伟. 红外热成像技术在电连接器插拔磨损检测中的应用研究[J]. 工程设计学报, 2021, 28(5): 615-624.
[2] 李锐, 李文强, 漆小华, 王萌, 宋悦刚, 刘漾. 面向多张CAD图纸的文本信息自动提取与实现[J]. 工程设计学报, 2021, 28(2): 148-154.
[3] 曾琪, 宾光富, 李超, 陈立锋. 联轴器扭转刚度对潜油电泵细长串联轴系扭振特性的影响研究[J]. 工程设计学报, 2021, 28(1): 89-94.
[4] 骆燕燕, 武雄伟, 田亚超, 于长潮. 冲击环境下电连接器接触性能研究[J]. 工程设计学报, 2018, 25(1): 110-117.
[5] 骆燕燕, 杨静宇, 任永隆, 张元磊, 李文君. 电连接器接触件插拔特性仿真与试验研究[J]. 工程设计学报, 2017, 24(2): 168-173,195.
[6] 骆燕燕, 杨静宇, 刘昕伟, 李晓宁. 电连接器接触件应力场的数值分析与试验验证[J]. 工程设计学报, 2016, 23(6): 564-570.
[7] 梁云忠, 金波, 乔玉鹏. 基于导向插合的毛刷电接触对结构改进设计[J]. 工程设计学报, 2016, 23(3): 212-216.
[8] 黎伟, 雷鸿翔, 黎宗琪, 李斌, 袁圣桐. 高压密封连接器的设计及研究[J]. 工程设计学报, 2016, 23(3): 295-300.
[9] 许成彬,潘 骏,陈文华,贺青川,张利彬,梁 俊. 高温电连接器有限元热分析与接触件插拔试验[J]. 工程设计学报, 2015, 22(3): 250-255.
[10] 陈继刚, 张国智, 林宇飞. 铝合金轮毂弯曲疲劳试验的有限元模型[J]. 工程设计学报, 2011, 18(2): 120-123.
[11] 林瑞进, 陈文华, 刘娟, 高亮, 潘骏. 航天电连接器加速性能退化试验可行性研究[J]. 工程设计学报, 2010, 17(4): 317-320.
[12] 郭佳民, 袁行飞, 董石麟, 赵晓旭. 基于实测数据的弦支穹顶计算模型修正[J]. 工程设计学报, 2009, 16(4): 297-302.
[13] 罗明军,王文林. 双扭杆双横臂独立悬架结构件有限元分析与关联式结构优化[J]. 工程设计学报, 2009, 16(2): 108-111.