Please wait a minute...
工程设计学报
工程设计学报  2001, Vol. 8 Issue (4): 186-190    
工程设计理论、方法与技术     
基于PLIB-STEP标准的集成产品数据模型的研究
 余军合1, 吴昭同1, 祁国宁2
1.浙江大学机械工程学系,浙江杭州310027; 
2.杭州汽轮动力集团,浙江杭州310022
Research on of Integrated Product Data Model Based on PLIB and STEP
 YU  Jun-He1, WU  Zhao-Tong1, QI  Guo-Ning2
1. Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China;
2. Hangzhou Steam Turbine and Power Group Corporation, Hangzhou 310022, China
 全文: PDF(167 KB)   HTML
摘要： STEP(ISO10303)标准对产品全生命周期信息进行规范化描述,是产品信息交换的基础,但缺乏高层次的语义描述. PLIB(零件库标准,ISO13584)通过总模型、功能模型和功能视图模型类及其结构来表示产品设计原理和多域多级别视图显示.结合PLIB/STEP的特点,提出了集成产品模型及信息共享的机制.
关键词： STEP;  PLIB;  集成产品数据模型    
Abstract:  STEP (ISO 10303) describs product model information for life cycle engineering. It is the basis for the exchange of product data, but lacks advanced semantic expression. PLIB (Parts Library, ISO13584) expresses product model information by General Model, Functional Model, Functional View Model and Representation Category. It provides the capabilities to describe product information multi-expert and multi-level perspective. Based on PLIB and STEP, the integrated product model is studied, and the mechanism of product information sharing is also provided.
Key words:  PLIB    STEP    integrated product data model
出版日期: 2001-12-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
余军合
吴昭同
祁国宁

引用本文:

余军合, 吴昭同, 祁国宁. 基于PLIB-STEP标准的集成产品数据模型的研究[J]. 工程设计学报, 2001, 8(4): 186-190.

YU Jun-He, WU Zhao-Tong, QI Guo-Ning. Research on of Integrated Product Data Model Based on PLIB and STEP[J]. Chinese Journal of Engineering Design, 2001, 8(4): 186-190.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2001/V8/I4/186

No related articles found!