Please wait a minute...
工程设计学报  2009, Vol. 16 Issue (1): 1-6    
工程设计理论、方法与技术     
基于改进型功能方法树的公理化设计
 张广军, 唐敦兵
南京航空航天大学 机电学院, 江苏 南京 210016
Axiomatic design based on improved function-means tree
 ZHANG  Guang-Jun, TANG  Dun-Bing
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics & Astronautics,  Nanjing 210016, China
 全文: PDF(1427 KB)   HTML
摘要: 分析了公理化设计在产品设计中的应用现状,指出现有公理化设计的两大不足:不能提供从功能域到物理域具体的映射实现手段和公理化设计不能支持这种经验性设计行为.针对公理化设计中存在的不足,提出基于改进型功能方法树的公理化设计方法的框架模型:以设计知识库为基础,建立改进型功能方法树,并以此为依据促成公理化设计的功能需求与设计参数的分解与映射,实现公理设计中功能与结构的同步演化;最后,通过自动化糖果包装机设计为例验证了该方法的可行性.
关键词: 公理化设计改进型功能方法树产品设计    
Abstract: After analyzing the current application situation of axiomatic design in product design, the two disadvantages of existing axiomatic design: it cannot provide specific mapping implementing means from functional field to physical field, and it cannot support empirical design behavior, are analyzed. Aiming at these disadvantages, the framework model of axiomatic design method based on modified function-means tree (IFMT) was presented. Then, modified function-means tree was established based on design knowledge tree, according to which the decomposition and mapping from function requirement of axiomatic design to design parameters were promoted. This implemented co-evolution of function and structure in axiomatic design. Finally, by taking automatic sweet packaged machine as a case study, the feasibility of this means was demonstrated.
Key words: axiomatic design    improved function-means tree    product design
出版日期: 2009-02-28
基金资助:

国家自然科学基金资助项目(50505017,50775111)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
张广军
唐敦兵

引用本文:

张广军, 唐敦兵. 基于改进型功能方法树的公理化设计[J]. 工程设计学报, 2009, 16(1): 1-6.

ZHANG Guang-Jun, TANG Dun-Bing. Axiomatic design based on improved function-means tree[J]. Chinese Journal of Engineering Design, 2009, 16(1): 1-6.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I1/1

[1] 梁中凯, 李贵, 刘耀东. 产品设计过程中非模型信息管理方法与管理系统[J]. 工程设计学报, 2020, 27(1): 13-18.
[2] 潘伟杰, 范灵秀, 吕健. 面向多维意象的产品设计方案评估研究[J]. 工程设计学报, 2017, 24(3): 250-255,302.
[3] 伍琴, 吕健, 潘伟杰, 刘丹. 基于案例的文化创意产品设计方法研究[J]. 工程设计学报, 2017, 24(2): 121-133.
[4] 薛锋. 浅析产品设计效果图的信息传达作用[J]. 工程设计学报, 2010, 17(2): 134-137.
[5] 丁俊武, 杨东涛, 曹亚东, 王林. 情感化设计的主要理论、方法及研究趋势[J]. 工程设计学报, 2010, 17(1): 12-18.
[6] 石夫乾, 孙守迁, 徐江. 基于模糊关联与BP网络的客户感性知识挖掘[J]. 工程设计学报, 2007, 14(5): 349-353.
[7] 檀润华, 苑彩云, 曹国忠, 张瑞红. 反向鱼骨图下的现有产品功能模型建立[J]. 工程设计学报, 2003, 10(4): 197-201.
[8] 朱爱斌, 陈永进, 谢友柏. 支持专业知识获取的中间件的研究[J]. 工程设计学报, 2003, 10(3): 113-117.
[9] 李志辉, 查建中, 张英. 同异反产品设计方法[J]. 工程设计学报, 2003, 10(1): 1-6.
[10] 黄旗明, 潘云鹤. 产品设计中技术创新的思维过程模型研究[J]. 工程设计学报, 2000, 7(2): 1-4.
[11] 倪俊芳, 顾德裕, 欧海涛, 蔡建国. 考虑可回收性的产品设计方法[J]. 工程设计学报, 2000, 7(1): 11-13.