Please wait a minute...
工程设计学报
工程设计学报  2007, Vol. 14 Issue (4): 290-294    
工程设计理论、方法与技术     
注塑模抽芯机构可重构设计方法
 潘柏松, 龚惠玲
浙江工业大学 机电工程学院， 浙江 杭州 310032
Research on reconfigurable design methodology of injection molding core-pulling mechanism
 PAN  Bai-Song, GONG  Hui-Ling
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, 310032
 全文: PDF(461 KB)   HTML
摘要： 注塑产品侧向成型单元特征的多样性带来了注塑模抽芯机构设计的复杂性和空间布局的难度。根据注塑模抽芯机构的原理相似性和可重构设计思想，提出注塑模抽芯机构的可重构设计方法。在分析抽芯机构运动规律的基础上，建立抽芯机构的功能模型，提出可重构的功能元模型和结构元模型；基于侧向成型方法知识库、抽芯机构可重构功能元和结构元模型库，建立注塑模抽芯机构的重构设计算法。注塑模抽芯机构可重构设计方法基于抽芯机构的可重构功能元和结构元族模型，实现了注塑模抽芯机构的设计资源重用，从设方法的角度有效地解决了注塑模抽芯机构设计的知识管理问题；基于侧向成型方法知识库及侧向成型单元特征-抽芯单元映射算法实现了侧向型芯的集成抽芯，避免了抽芯机构的冗余；基于空间布局约束的功能元-结构元映射方法实现了抽芯机构的快速设计。通过工程实例验证了方法的有效性。
关键词： 注塑模;  抽芯机构;  可重构设计    
Abstract: Variety of molding unit features of injection molding part bring complexity both to injection molding core-pulling mechanism design and spatial layout in injection molding design. Based on motion principle of this mechanism, its function model is established and the reconfigurable function unit as well as structure unit model is put forward. Based on repository of side direction moldingmethod, function unit and structure unit of core-pulling mechanism, the reconfigurable design algorithm of this mechanism is set up. This algorithm is based onits function unit and structure unit model, and implements the reuse of its design resource. Besides, this algorithm effectively solves the knowledge management of this mechanism from the aspect of methodology. Based on repository of side direction molding method, map algorithm between side direction molding unit features and core-pulling unit, the integrated core-pulling of side direction cores is implemented, which avoids redundancy. On the basis of spatial layout restricted map method between function unit and structure unit, its fast design is realized. This method has been validated by an engineering example.
Key words: injection molding    core-pulling mechanism    reconfigurable design
出版日期: 2007-08-28
基金资助:

国家自然科学基金资助项目（50575207）；浙江省自然科学基金资助项目（Y104536）；浙江省重中之重学科“先进制造技术与装备”资助项目
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
潘柏松
龚惠玲

引用本文:

潘柏松, 龚惠玲. 注塑模抽芯机构可重构设计方法[J]. 工程设计学报, 2007, 14(4): 290-294.

PAN Bai-Song, GONG Hui-Ling. Research on reconfigurable design methodology of injection molding core-pulling mechanism[J]. Chinese Journal of Engineering Design, 2007, 14(4): 290-294.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2007/V14/I4/290

[1] 林权, 刘瑞来. 汽车饰盖CAE分析及成型工艺优化[J]. 工程设计学报, 2017, 24(6): 661-667.
[2] 王毅, 陈庆新, 毛宁. 基于自组织模糊规则归纳的注塑模改模知识发现[J]. 工程设计学报, 2010, 17(3): 168-172.