Please wait a minute...
工程设计学报
工程设计学报  2006, Vol. 13 Issue (1): 36-40    
工程设计理论、方法与技术     
零部件柔性分类编码技术研究
 高 飞, 肖 刚, 张元鸣, 吕慧强, 程振波
浙江工业大学 信息工程学院， 浙江 杭州 310032
Research on technology of flexible classification and coding
 GAO   Fei, XIAO   Gang, ZHANG  Yuan-Ming, LV Hui-Qiang , CHENG  Zhen-Bo
College of Information Engineering, Zhejiang University of Technology, Hangzhou 310032, China
 全文: PDF(341 KB)   HTML
摘要： 通过系统地定义分类编码系统的构成要素，指出了当前零部件编码系统的不足。建立了面向大批量定制设计的柔性分类编码体系，提出了基于链式与层次结构的柔性化定义，开发了相应的编码管理系统，通过编码树实现了零部件的自动编码。该系统在浙江省某摩托车液压盘式制动器厂家得到了有效的应用。
关键词： 柔性分类编码;  自动编码;  液压盘式制动器;  大批量定制设    
Abstract: Through systematically defining the constructing elements of coding system, this paper pointed out the drawbacks of current part classification and coding systems and established flexible classification and coding system for masscustomization. Additionally, flexible definition based on chain and hiberarchy was proposed and corresponding coding system had been developed, which implemented auto-coding of parts through coding tree. This system had been effectively applied in one motorcycle-hydraulic-disk brake factory in Zhejiang Province.
Key words: flexible classification and coding    auto coding    hydraulicdisk brake    design for mass customization
出版日期: 2006-02-28
基金资助:

浙江省自然科学基金资助项目(Y105200，Y105207)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
高 飞
肖 刚
张元鸣
吕慧强
程振波

引用本文:

高 飞, 肖 刚, 张元鸣, 吕慧强, 程振波. 零部件柔性分类编码技术研究[J]. 工程设计学报, 2006, 13(1): 36-40.

GAO Fei, XIAO Gang, ZHANG Yuan-Ming, LV Hui-Qiang , CHENG Zhen-Bo. Research on technology of flexible classification and coding[J]. Chinese Journal of Engineering Design, 2006, 13(1): 36-40.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I1/36

No related articles found!