Please wait a minute...
工程设计学报
工程设计学报  2009, Vol. 16 Issue (6): 415-420    
工程设计理论、方法与技术     
基于QFD理论的工业设计专业课程体系优化设计
 曾富洪, 李泽蓉
攀枝花学院 机电工程学院, 四川 攀枝花 617000
Optimization design of course system for industrial design major based on QFD
 ZENG  Fu-Hong, LI  Ze-Rong
College of Mechanical and Electrical Engineering, Panzhihua University, Panzhihua 617000, China
 全文: PDF(4334 KB)   HTML
摘要： 为了有效减少高校培养出来的工业设计人才与社会实际需求之间的错配现象,利用KJ法将能力需求类聚为9类,课程类聚为6个模块,采用层次分析法(AHP)求取各能力需求项的重要度,将其与调研得到的能力需求满意度一起作为基础信息输入质量屋.在进行课程模块的质量设计时,以质量屋的信息为基础,根据本校的经验和竞争对手的信息确定能力需求的目标满意度,以此建立目标规划模型求出各课程模块的目标值,进而得到工业设计专业的课程体系.由此,从根本上保证工业设计专业人才满足社会需求．
关键词： 工业设计;  质量屋;  优化技术    
Abstract: In order to reduce the mismatch between the persons cultivated in industrial design major in colleges and the persons actually required by the society, the KJ method was used to cluster ability demand into 9 clusters and cluster the courses into 6 modules. The weight of ability demand (WAD) was calculated by analytical hierarchy process (AHP) and it was input to the house of quality (HoQ) together with satisfactory degree of talent demand (STD). When the course modules were designed, the information in the HoQ acted as a basis and the objective STD was determined according to the information from the college itself and its opponents. On the basis of this, the objective planning model was established and the objective values of every course module were calculated. And finally the course system of industrial design major was obtained to guarantee that the cultivated persons could fulfill the social demands.
Key words: industrial design    house of quality    optimizing technology
出版日期: 2009-12-28
:  G 40  
基金资助:

四川省教研教改项目资助(06-511-153)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
曾富洪
李泽蓉

引用本文:

曾富洪, 李泽蓉. 基于QFD理论的工业设计专业课程体系优化设计[J]. 工程设计学报, 2009, 16(6): 415-420.

ZENG Fu-Hong, LI Ze-Rong. Optimization design of course system for industrial design major based on QFD[J]. Chinese Journal of Engineering Design, 2009, 16(6): 415-420.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I6/415

[1] 邢锡金, 曹国忠, 刘伟, 吴中富. 基于Matrix 2003与效应的产品工业设计创新方法研究[J]. 工程设计学报, 2016, 23(1): 14-21.
[2] 郭茜，王增强，蒲云. 技术特征优先度评估的组合赋权法[J]. 工程设计学报, 2014, 21(1): 92-100.
[3] 牛东方, 谢里阳, 邓明, 钟莹. 产品交互设计中的视觉形态认知研究[J]. 工程设计学报, 2013, 20(6): 459-462.
[4] 周睿, 费凌峰. 基于实务项目制的工业设计工程教育CDIO模式探索[J]. 工程设计学报, 2013, 20(2): 151-156.
[5] 吴晓莉, 陈慧娟. 一种租赁式轮椅的设计实现与工程分析[J]. 工程设计学报, 2012, 19(4): 323-328.
[6] 滕 健, 查建中, 刘阶萍. 基于质量功能配置的绿色产品设计与优化[J]. 工程设计学报, 2009, 16(5): 317-321.
[7] 张飞, 汤佳. 工业设计与情感[J]. 工程设计学报, 2004, 11(3): 167-168.
[8] 李绍彬. 柴油机外观造型设计研究[J]. 工程设计学报, 2001, 8(4): 201-203.