Please wait a minute...
工程设计学报
工程设计学报  2008, Vol. 15 Issue (6): 457-460    
机电产品工程设计     
变频控制和人机界面在纸管机中的应用
 关玉明, 朱 博, 刘 伟, 王 兴
河北工业大学 机械工程学院，天津 300130
Application of variable-frequncy control and HMI in paper-tube machine
 GUAN  Yu-Ming, ZHU   Bo, LIU   Wei, WANG   Xing
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China
 全文: PDF(2518 KB)   HTML
摘要： 旧式纸管机效率很低,不能满足市场需求,急需改进.将变频控制和人机界面引入纸管机中,完成对旧式纸管机的技术改造.介绍了变频器控制的要求和纸管机的基本控制方式；重点介绍了变频器和人机界面的通讯，两者的结合使用,实现了纸管机在线调速、产能计算等更多附加功能,使操作简单易行.实际运行表明，新型纸管机的生产效率提高了7倍,实现了生产过程的自动化操作.
关键词： 变频控制;  人机界面;  纸管机    
Abstract: Paper-tube machine is a machine used to coil parallelogram paper horizontally. The efficiency of old types was so low that it can not meet the need of market and they needed improvement. Variable-frequncy control and human machine interface(HMI) were applied in paper-tube machine, which performed technological modification on the old machines. The control reguirement and basic control method of the machine were introduced and the emphasis was the communication of variable frequncy speed regulation and HMI. The combination of them made additional functions, such as speed control on line, productivity calculation and easier operation. Practical application shows that the efficiency increases by 7 times and the automation of producing process has been realized．
Key words: variable-frequncy control    HMI    paper-tube machine
出版日期: 2008-12-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
关玉明
朱 博
刘 伟
王 兴

引用本文:

关玉明, 朱 博, 刘 伟, 王 兴. 变频控制和人机界面在纸管机中的应用[J]. 工程设计学报, 2008, 15(6): 457-460.

GUAN Yu-Ming, ZHU Bo, LIU Wei, WANG Xing. Application of variable-frequncy control and HMI in paper-tube machine[J]. Chinese Journal of Engineering Design, 2008, 15(6): 457-460.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2008/V15/I6/457

[1] 袁树植, 高虹霓, 王崴, 瞿珏, 刘晓卫, 李康. 基于感性工学的人机界面多意象评价[J]. 工程设计学报, 2017, 24(5): 523-529.
[2] 邓丽, 余隋怀, 陈波. 基于Vague集的人机界面布局眼动追踪评价[J]. 工程设计学报, 2016, 23(3): 222-227.
[3] 赵慧亮, 何林, 林丽. 数字化人机界面的多目标意象设计决策研究[J]. 工程设计学报, 2016, 23(1): 28-34.
[4] 辜夷, 干静. 机床面板外观设计的人机效率[J]. 工程设计学报, 2007, 14(6): 494-498.