Please wait a minute...
工程设计学报
工程设计学报  2020, Vol. 27 Issue (1): 51-58    DOI: 10.3785/j.issn.1006-754X.2020.00.008
保质设计     
组合油管对水平井修井管柱下入能力的影响研究
冯定1,2,3, 陈文康1,2,3, 孙巧雷1,2,3, 杜宇成1,2,3
1.长江大学 机械工程学院，湖北荆州 434023
2.湖北省油气钻完井工具工程技术研究中心，湖北荆州 434023
3.非常规油气湖北省协同创新中心，湖北武汉 430100
Study on the influence of combined tubing on running capacity of workover string in horizontal well
FENG Ding1,2,3, CHEN Wen-kang1,2,3, SUN Qiao-lei1,2,3, DU Yu-cheng1,2,3
1.School of Mechanical Engineering, Yangtze University,Jingzhou 434023,China
2.Hubei Engineering Research Center for Oil & Gas Drilling and Completion Tools,Jingzhou 434023,China
3.Hubei Cooperative Innovation Center of Unconventional Oil and Gas,Wuhan 430100,China
 全文: PDF(1790 KB)   HTML
摘要： 针对修井管柱在大水垂比、长水平段水平井下入困难的问题，采用修井管柱2种规格油管组合下入作业的方式，开展了不同油管长度比例对修井管柱下入能力影响的研究。基于水平井井眼轨迹的特点，综合考虑修井管柱在各井段的受力情况，建立了修井管柱在水平井垂直段、造斜段和水平段下入过程中的载荷计算模型，应用插值法、迭代法及分段判别计算法实现了模型的求解，并编制了相应的计算软件。基于现场数据进行了修井管柱下入能力的实例研究，结果表明：相较于修井管柱主体为单一线重油管和其他不同长度比例的2-7/8和3-1/2两种线重组合油管，组合油管中线重较大的3-1/2油管下入到井斜角为56.3°左右的井深时修井管柱的下入能力最佳。研究结果可为油田水平井修井管柱的安全下入提供指导。
Abstract: In order to solve the problem that the workover string is difficult to run downhole in the high horizontal-displacement to vertical-depth ratio and the long horizontal section, the running ability of workover string with different length proportion of combined tubing was studied based on the operation of workover string with two kinds of combined tubing. Based on the characteristics of horizontal well trajectory and considering the stress condition of workover string in each well section, a load calculation model for workover string in vertical section, deflecting section and horizontal section of horizontal well was established. The model was solved by interpolation method, iteration method and segmental discriminant method, and the relevant calculation software was compiled. Based on the field data, a case study of the workover string running capability was carried out. The results showed that, when the tubing with larger line weight among the workover strings went down to the well depth at about 56.3°, the workover string had the best running ability compared with the combination of workover string body and single line heavy tubing or two kinds of line heavy tubing with different length proportions. Research results can provide guidance for the safe running of workover string in horizontal well.
收稿日期: 2019-04-02 出版日期: 2020-02-28
CLC:  TE 935  
基金资助: 国家自然科学基金资助项目(51704034)；国家科技重大专项课题项目(2016ZX05038-002-LH001)；中海石油（中国）有限公司湛江分公司横向项目(CCL2017ZJFN2272)
通讯作者: 孙巧雷(1990—)，男，湖北黄冈人，讲师，博士，从事管柱力学研究，E-mail:sunqiaolei@163.com，https://orcid.org/0000-0003-3586-2025     E-mail: sunqiaolei@163.com
作者简介: 冯定(1963—)，男，安徽东至人，教授，博士，从事石油机械及井下工具设计、管柱力学等研究，E-mail:fengd0861@163.com，https://orcid.org/0000-0003-1550-7624
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

冯定, 陈文康, 孙巧雷, 杜宇成. 组合油管对水平井修井管柱下入能力的影响研究[J]. 工程设计学报, 2020, 27(1): 51-58.

FENG Ding, CHEN Wen-kang, SUN Qiao-lei, DU Yu-cheng. Study on the influence of combined tubing on running capacity of workover string in horizontal well. Chinese Journal of Engineering Design, 2020, 27(1): 51-58.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2020.00.008    或    https://www.zjujournals.com/gcsjxb/CN/Y2020/V27/I1/51

No related articles found!