Please wait a minute...
工程设计学报
工程设计学报  2019, Vol. 26 Issue (2): 123-132    DOI: 10.3785/j.issn.1006-754X.2019.02.001
设计理论与方法学     
增材制造使能的航空发动机复杂构件快速研发
陈静, 侯伟, 周毅博, 王修专, 储松林
中国航空发动机集团有限公司控制系统研究所 3D使能研发技术联合实验室， 江苏 无锡 214063
Rapid research and development of complex components in aero-engine enabled by additive manufacturing
CHEN Jing, HOU Wei, ZHOU Yi-bo, WANG Xiu-zhuan, CHU Song-lin
Joint Laboratory of 3D Enable R & D Technology, Aero Engine Control System Institute, Aero Engine Corporation of China (AECC), Wuxi 214063, China
 全文: PDF(8949 KB)   HTML
摘要： 为满足航空发动机控制系统复杂构件快速研制需求，研究了基于数字化模型驱动和SLM（selective laser melting, 选区激光熔化）增材制造技术的快速研发迭代技术。通过建立增材制造使能的高效正向研发模式，打通 “设计—仿真—制造—验证—认证”一体化迭代流程和技术路径，实现了系统级产品功能和性能最优化开发。工程应用实践表明，该技术促进了航空发动机控制系统向轻量化、集约化、高性能、高可靠性方向发展，推动复杂关键零部件/组件的创新研发与应用，不仅可以缩短研制周期，还可降低研发成本，使系统研发效能大幅提升。
Abstract: In order to meet the requirements of rapid research and development (R & D) on complex components of control system in aero-engine, a rapid R & D iterative method which combines the digital model driving and selective laser melting (SLM) additive manufacturing technology is investigated. Through the establishment of the efficient forward R & D mode based on the enabled additive manufacturing, the integrated iterative process and technical path with “design-simulation-manufacturing-verification-certification” chain was broke through and the optimization of function and performance for system level products was achieved. The engineering application practice indicates that this technology promotes the development of aero-engine control system towards the direction of lightweight, integration, high performance and high reliability, and it drives the innovative R & D and application of complex key parts/components, which can not only shorten the R & D cycle, but also reduce the R & D cost, and greatly improve the system R & D efficiency.
收稿日期: 2018-10-15 出版日期: 2019-04-28
CLC:  TN 249  
基金资助: 国家重点研发计划资助项目（2018YFB1106400，2016YFB1100600）
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈静, 侯伟, 周毅博, 王修专, 储松林. 增材制造使能的航空发动机复杂构件快速研发[J]. 工程设计学报, 2019, 26(2): 123-132.

CHEN Jing, HOU Wei, ZHOU Yi-bo, WANG Xiu-zhuan, CHU Song-lin. Rapid research and development of complex components in aero-engine enabled by additive manufacturing. Chinese Journal of Engineering Design, 2019, 26(2): 123-132.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2019.02.001    或    https://www.zjujournals.com/gcsjxb/CN/Y2019/V26/I2/123

[1] 陈娟, 方亮, 许徽, 宋娟. 基于STL模型投影轮廓的EPS连续切割技术[J]. 工程设计学报, 2010, 17(1): 66-70.