Please wait a minute...
工程设计学报
工程设计学报  2015, Vol. 22 Issue (5): 445-451    DOI: 10.3785/j.issn. 1006-754X.2015.05.007
建模、分析、优化和决策     
刮板输送机链传动系统接触动力学特性分析
毛 君，董先瑞，谢 苗，白雅静，谢春雪
辽宁工程技术大学 机械工程学院，辽宁 阜新 123000
Contact dynamics characteristic analysis on chain transmission system of scraper conveyer
MAO Jun, DONG Xian-rui, XIE Miao, BAI Ya-jing, XIE Chun-xue
School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China
 全文: PDF(1991 KB)   HTML
摘要： 链传动系统是综采工作面刮板输送机最重要的系统.为了研究刮板输送机在运行过程中链传动系统的接触动力学特性，利用有限单元法分别建立平动链条模型、转动链条模型和链环与链轮啮合接触的模型，基于三维建模软件建立链条和链环与链轮啮合的虚拟样机模型．利用非线性有限元软件LS-DYNA分析了启动过程中链环之间接触动力学特性和正常工作过程中链环链轮啮合接触动力学特性，得出了启动过程中链环之间加速度、应力变化规律和正常工作中链环与链轮啮合过程位移、速度、应力的变化规律，为链轮传动系统瞬态动力学和传动系统关键零部件优化设计提供关键设计参数．
关键词： 刮板输送机;  链轮;  链环;  有限单元法;  接触动力学    
Abstract: The chain transmission system is the most important system of fully mechanized working face scraper conveyor. In order to study the dynamic characteristics of scraper conveyor in the process of operating the chain transmission system, the finite element method was used to establish translational chain model, rotary chain model, and meshing contact model of chain and sprocket while the virtual prototype model was established by 3D modeling software. The contact dynamics characteristics between chain in the start working process and the meshing contact dynamics characteristics between chain and sprocket in the normal working process were analyzed by using the nonlinear finite element software LS-DYNA. The variation of acceleration between links in the start process, the stress variation, and the variation of speed, displacement and stress in the normal process of chain and sprocket meshing were obtained which provided the key design parameters for the key parts of chain wheel transmission system transient dynamics and transmission system components optimization.
Key words: scraper conveyor    sprocket    chain    finite element method    contact dynamics
收稿日期: 2014-09-25 出版日期: 2015-10-28
基金资助:

辽宁省教育厅科学研究一般项目(L2012118)；辽宁省教育厅创新团队资助项目(LT2013009)；辽宁省煤矿液压技术与装备工程研究中心开放基金资助项目(CMHT-201206)
作者简介: 毛君(1960—)，男，辽宁鞍山人，教授，博士生导师，从事机械动态设计及仿真、机电一体化产品研发等研究，E-mail:lngcjsdxmaojun@163.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

毛 君，董先瑞，谢 苗，白雅静，谢春雪. 刮板输送机链传动系统接触动力学特性分析[J]. 工程设计学报, 2015, 22(5): 445-451.

MAO Jun, DONG Xian-rui, XIE Miao, BAI Ya-jing, XIE Chun-xue. Contact dynamics characteristic analysis on chain transmission system of scraper conveyer. Chinese Journal of Engineering Design, 2015, 22(5): 445-451.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2015.05.007    或    https://www.zjujournals.com/gcsjxb/CN/Y2015/V22/I5/445

[1] 刘进文, 任芳, 谢嘉成, 杨兆建. 基于WebGL的刮板输送机链轮参数化设计方法[J]. 工程设计学报, 2019, 26(2): 237-244.
[2] 乔春光, 王学文, 谢嘉成, 杨兆建. 基于采煤机运行轨迹的刮板输送机竖直面形态解算方法[J]. 工程设计学报, 2018, 25(5): 495-502.
[3] 曹周红, 练继建, 刘晓平. 坞式结构有限元仿真模拟及施工过程对底板受力影响分析[J]. 工程设计学报, 2013, 20(4): 326-331.
[4] 王跃钢, 秦永元, 郭志斌. ANSYS在液浮摆式加速度计复合环境动态特性分析中的应用[J]. 工程设计学报, 2005, 12(2): 105-108.