Please wait a minute...
工程设计学报
工程设计学报  2015, Vol. 22 Issue (2): 137-142    DOI: 10.3785/j.issn. 1006-754X.2015.02.006
保质设计     
基于随机Petri网的铜带拉弯矫直机可用度分析
周孟绍，潘 骏，陈文华，贺青川
浙江理工大学 浙江省机电产品可靠性技术研究重点实验室，浙江 杭州 310018
Availability analysis of the copperbelt tension leveler based on stochastic Petri nets
ZHOU Meng-shao， PAN Jun， CHEN Wen-hua， HE Qing-chuan
Zhejiang Province's Key Laboratory of Reliability Technology for Mechanical & Electrical Product，Zhejiang Sci-Tech University， Hangzhou 310018，China
 全文: PDF(1318 KB)   HTML
摘要： 为了合理确定铜带拉弯矫直机的校验周期，提高其生产效率，确保其矫直精度，根据某铜板带公司拉弯矫直机9个月的维修数据，对拉弯矫直机的失效模式进行随机Petri网建模，将系统失效模式转换成相应的随机Petri网；基于马尔科夫过程对随机Petri网进行瞬态概率求解，并得到该拉弯矫直机失效模式的稳态概率；利用或门对应的随机Petri网模型分析，计算不同校验周期下拉弯矫直机的可用度.综合考虑设备可用度和经济效益，确定了合理的校验周期，为拉弯矫直机的长周期运行提供了依据．
关键词： 拉弯矫直机;  随机Petri网;  稳态概率;  可用度    
Abstract: In order to reasonably determine the checking cycle of the tension leveler for copper belt, simultaneously improve its productivity and its straightening precision,   the system failure mode were converted into a corresponding stochastic Petri nets and a stochastic Petri nets model of tension leveler failure mode was made according to the maintenance data of a company's  tension leveler for copper belt within nine months. Based on Markov process, the transient  probability for the stochastic Petri nets was worked out and the  steady-state  probability for tension leveler failure modes was got. The availability of tension leveler with different checking cycles was  calculated by analyzing the OR gate corresponded stochastic Petri net model. The reasonable checking cycle was determined  by comprehensively considering the availability and economic efficiency, which provided the basis for long-term cycle running of tension leveler.
Key words: tension leveler    stochastic Petri nets    steady-state probability    availability
收稿日期: 2014-11-04 出版日期: 2015-04-28
基金资助:

国家自然科学基金资助项目（51275480）；浙江省重点科技创新团队项目（2010R50005）．
作者简介: 周孟绍（1989—），男，浙江宁波人，硕士生，从事机电产品可靠性研究，E-mail：378133668@qq．com． 通信联系人：陈文华（1963—），教授，博士生导师，E-mail：chenwh@zstu．edu．cn．
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

周孟绍，潘 骏，陈文华，贺青川. 基于随机Petri网的铜带拉弯矫直机可用度分析[J]. 工程设计学报, 2015, 22(2): 137-142.

ZHOU Meng-shao， PAN Jun， CHEN Wen-hua， HE Qing-chuan. Availability analysis of the copperbelt tension leveler based on stochastic Petri nets. Chinese Journal of Engineering Design, 2015, 22(2): 137-142.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2015.02.006    或    https://www.zjujournals.com/gcsjxb/CN/Y2015/V22/I2/137

[1] 李 俊，王贤琳. 基于分解法建模的泵送系统可靠性和可用性评估[J]. 工程设计学报, 2015, 22(1): 18-25.
[2] 印明昂, 孙志礼, 杨丽, 王健. 退化串联可修系统瞬态可靠性分析[J]. 工程设计学报, 2013, 20(4): 277-281.