Please wait a minute...
工程设计学报  2013, Vol. 20 Issue (3): 180-184    
工程设计理论、方法与技术     
基于物-场模型的纳米空心镍球的制备方法研究
 胡连军, 李彦, 李翔龙, 李文强, 万延见
四川大学 制造科学与工程学院,四川 成都 610065
Study of preparation method of nanometer-sized hollow nickel spheres based on substance-field model
 HU  Lian-Jun, LI  Yan, LI  Xiang-Long, LI  Wen-Qiang, WAN  Yan-Jian
School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China
 全文: PDF(691 KB)   HTML
摘要: 针对目前混镍粉电火花腐蚀制备纳米空心镍球,存在着蚀除电极金属液滴与工作液中的小气泡不能充分结合,形成中空结构的问题,采用创新设计方法及知识库进行解决.根据实际工况,构建问题物场模型,在知识库中搜索多种场,获得相应的解决方案.运用模糊评价法对多种方案进行评价与排序,挑选出最优方案——采用超声波场代替原有的机械场,开发出超声波制备纳米空心镍球装置,较好地改善了原有系统制备空心镍球的质量和效率.
关键词: 纳米空心镍球物-场模型知识库模糊评价法超声波    
Abstract: In current preparation of nanometersized hollow nickel spheres by nickel powdermixed spark erosion, ablative nickel droplets and small bubbles in the working liquid could not be fully integrated to form the hollow structure. The problem could be solved by adopting innovation design methods and knowledge base. According to the actual working condition, a substance-field model was settled and a variety of corresponding solutions were caught by searching multiple fields in the knowledge base. The solutions were evaluated and sorted by fuzzy evaluation method, then, the optimal solution was selected that replacing the original mechanical field with ultrasonic filed. Thus, preparation of nanometersized hollow nickel spheres by ultrasonic device was introduced, it could improve the quality and efficiency of preparation of hollow nickel spheres.
Key words: nanometer-sized hollow nickel spheres    substance-field model    knowledge base    fuzzy evaluation method    ultrasonic
出版日期: 2013-06-28
基金资助:

国家自然科学基金资助项目(51175355,51275324);科技部创新方法工作专项(2011IM010100).

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
胡连军
李彦
李翔龙
李文强
万延见

引用本文:

胡连军, 李彦, 李翔龙, 李文强, 万延见. 基于物-场模型的纳米空心镍球的制备方法研究[J]. 工程设计学报, 2013, 20(3): 180-184.

HU Lian-Jun, LI Yan, LI Xiang-Long, LI Wen-Qiang, WAN Yan-Jian. Study of preparation method of nanometer-sized hollow nickel spheres based on substance-field model. Chinese Journal of Engineering Design, 2013, 20(3): 180-184.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I3/180

[1] 胡艺耀, 朱斌, 张伟, 何畏, 沈平生. 知识库构建工具软件的设计与实现[J]. 工程设计学报, 2018, 25(4): 367-373.
[2] 杨圣, 李彦, 李文强, 刘龙繁. 基于3M特征的设计知识表达模型[J]. 工程设计学报, 2018, 25(3): 245-252.
[3] 刘伟,曹国忠,檀润华,魏赛娜. 多生物效应的编码方法研究[J]. 工程设计学报, 2014, 21(1): 1-5.
[4] 张鲁海, 李彦, 李文强, 熊艳. 面向创新设计的专题知识库构建与应用[J]. 工程设计学报, 2012, 19(4): 241-249.
[5] 吴庆鸣, 李 勇, 周 超. 基于知识工程复杂产品开发过程的模型研究[J]. 工程设计学报, 2008, 15(5): 324-329.
[6] 王忠祥, 郭宝恩, 张付英. CAQFD概念设计专家系统模式的研究[J]. 工程设计学报, 2006, 13(3): 135-139.