Please wait a minute...
工程设计学报
工程设计学报  2012, Vol. 19 Issue (5): 400-404    
机电产品工程设计     
基于FPGA的偏振OCT双路信号处理系统
 黄锐, 陈晓冬, 汪毅, 郁道银
天津大学 精密仪器与光电子工程学院,教育部光电子信息技术科学重点实验室,天津 300072
FPGA-based dual-signal processing system of polarization-sensitive OCT
 HUANG  Rui, CHEN  Xiao-Dong, WANG  Yi, YU  Dao-Yin
College of Precision Instruments & Opto-electronic Engineering, Tianjin University,Opto-electronic Information Science and Technical Laboratory, Ministry of Education, Tianjin 300072, China
 全文: PDF(510 KB)   HTML
摘要： 针对目前基于计算机的偏振OCT具有系统数据处理速度慢、不能实时显示等问题,设计了基于FPGA的偏振OCT双路信号处理系统.FPGA设计包含同步时序控制、正交解调和CORDIC运算三个模块.同步时序控制模块为系统的各器件提供同步控制信号,实现数据的实时处理和同步显示.正交解调和CORDIC运算模块对预处理后的干涉信号进行振幅解调和相位解调,获取反射率和双折射率数据,经USB接口送入计算机进行实时显示.对玻片、云母片和生物组织进行偏振OCT系统成像,对成像结果的分析验证了系统具有实时探测生物组织反射率和双折射率的能力.
关键词： 偏振OCT;  双折射;  双路信号;  FPGA;  CORDIC算法    
Abstract: In consideration of the deficiencies in a polarization-sensitive OCT system based on the computer, such as low data-processing rate, unachievable realtime display and so on, a FPGA-based dual-signal processing system of polarization-sensitive OCT was built. FPGA design consisted of three modules: synchronous sequential control, quadrature demodulation and CORDIC arithmetic operations. Synchronous control signals was provided by synchronous sequential control module for each device of the system to achieve real-time processing of data and simultaneous display. The interference signal followed by pretreatment was implemented by quadrature demodulation and CORDIC arithmetic operations to proceed amplitude demodulation and phase demodulation, the obtained data of reflectivity and birefringence was sent into the computer to achieve real-time display via the USB interface. the polarization-sensitive OCT experiment was designed by the paper to obtain two-dimensional image of cover slip, mica and biological tissue, after analyzing the result of experiment, the ability of real-time detecting in reflectivity and birefringence is verified.
Key words: PS-OCT    birefringence    dual-signal    FPGA    CORDIC algorithm
出版日期: 2012-10-28
基金资助:

国家自然科学基金资助项目(30800245).
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
黄锐
陈晓冬
汪毅
郁道银

引用本文:

黄锐, 陈晓冬, 汪毅, 郁道银. 基于FPGA的偏振OCT双路信号处理系统[J]. 工程设计学报, 2012, 19(5): 400-404.

HUANG Rui, CHEN Xiao-Dong, WANG Yi, YU Dao-Yin. FPGA-based dual-signal processing system of polarization-sensitive OCT. Chinese Journal of Engineering Design, 2012, 19(5): 400-404.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2012/V19/I5/400

[1] 赵岩, 马铁华, 杜红棉, 栗晶晶, 宓莎, 田壮. 基于FPGA和无线通信的冲击波超压采集系统设计[J]. 工程设计学报, 2011, 18(6): 449-452.
[2] 刘 勇, 许爱强, 孟 上. 阴性选择算法匹配规则的FPGA实现[J]. 工程设计学报, 2010, 17(6): 464-468.
[3] 杨克己, 桑武斌. 基于FPGA的高精度压电陶瓷数字驱动电源[J]. 工程设计学报, 2008, 15(6): 435-438.
[4] 冯浩, 华亮, 张建生, 王万良. 超声波电机模糊微步控制在指示表[J]. 工程设计学报, 2006, 13(3): 154-161.
[5] 高昆, 刘莉, 汪乐字. 一种32位VXI总线接口电路的集成化设计方法[J]. 工程设计学报, 2002, 9(1): 36-40.