Please wait a minute...
工程设计学报  2011, Vol. 18 Issue (4): 317-320    
机电产品工程设计     
平缝机的组态设计方法研究
 张 莉
台州学院 机械工程学院,浙江 台州 318000
Research of configuration design for sewing machine
 ZHANG  Li
School of Mechanical Engineering, Taizhou University, Taizhou 318000, China
 全文: PDF(779 KB)   HTML
摘要: 为了提高平缝机产品的设计效率和质量,提出了一种组态式产品设计方法,并给出了基于组态技术的产品开发流程,分析了组件化设计的方法.在应用层次分析法和模糊综合评判算法的基础上,对组件的确定过程进行了详细阐述,并通过生成性规则和修改性规则两种准则来完成组件的设计.最后,应用该组态设计方法对平缝机进行产品设计开发,验证了该方法的可行性和有效性.
关键词: 组态组件化平缝机    
Abstract: To improve design efficiency and quality of sewing machine products, configuration product design method was proposed. Product development process based on configuration technology was presented, and componentization design method was analyzed. On the base of analytic hierarchy process and fuzzy comprehensive evaluation, component determination process was described. Then component was design by generation rules and modification rules. Finally, the application in the design of sewing machine shows the feasibility and validity of proposed method.
Key words: configuration    componentization    sewing machine
出版日期: 2011-08-28
:  TH 122  
基金资助:

浙江省教育厅科研项目(Y200906405)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
张莉

引用本文:

张 莉. 平缝机的组态设计方法研究[J]. 工程设计学报, 2011, 18(4): 317-320.

ZHANG Li. Research of configuration design for sewing machine[J]. Chinese Journal of Engineering Design, 2011, 18(4): 317-320.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I4/317

[1] 陈孟元. 土壤界限含水率自动检测系统设计研究[J]. 工程设计学报, 2017, 24(4): 473-479.