Please wait a minute...
工程设计学报
工程设计学报  2010, Vol. 17 Issue (1): 71-75    
机电产品工程设计     
格利森弧齿锥齿轮啮合传动节线的数学原理
谷计划，段建中
宁夏大学 机械工程学院,宁夏 银川 750021
Mathematic principle of pitch line of Gleason spiral bevel gear pair in driving
 GU  Ji-Hua, DUAN  Jian-Zhong
School of Mechanical Engineering, Ningxia University, Yinchuan 750021, China
 全文: PDF(3451 KB)   HTML
摘要： 弧齿锥齿轮齿面线是设计和加工的重要几何要素,同时也是弧齿锥齿轮机床设计(包括格里森制式和奥利康制式)的重要出发点之一.从节圆锥面上节线的基本定义出发,结合格里森制式弧齿锥齿轮的加工原理,推导出单个弧齿锥齿轮的节线方程，并定量证明了一对相互啮合的弧齿锥齿轮节线在转动过程中是连续接触的.为弧齿锥齿轮接触轨迹方向的研究及接触状态的分析提供了一种方法.
关键词： 弧齿锥齿轮;  节圆锥;  节线    
Abstract: The tooth facial line of spiral bevel gears is the key geometric element in design and manufacture, and meantime it is one of the crucial considerations in design of spiral bevel gear machining tool. This paper began with the basic definition of pitch lines, and by combining the machining principle of Gleason spiral bevel gears; the pitch line equation of single spiral bevel gear was deduced. The conclusion that the pairing two pitch lines of spiral bevel gear contacted continuously during transmission was quantitatively proved.  It provides a method for researching contact track and contact state of spiral bevel gears.
Key words: spiral bevel gear    pitch cone    pitch line
出版日期: 2010-02-28
:  TH 132  
基金资助:

国家自然科学基金资助项目(50665005);宁夏回族自治区自然科学基金资助项目(NZ0720)．
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
谷计划
段建中

引用本文:

谷计划, 段建中. 格利森弧齿锥齿轮啮合传动节线的数学原理[J]. 工程设计学报, 2010, 17(1): 71-75.

GU Ji-Hua, DUAN Jian-Zhong. Mathematic principle of pitch line of Gleason spiral bevel gear pair in driving[J]. Chinese Journal of Engineering Design, 2010, 17(1): 71-75.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2010/V17/I1/71

[1] 孙月海, 唐二星. 弧齿锥齿轮基本参数优化设计[J]. 工程设计学报, 2020, 27(5): 616-624.
[2] 纪振海, 段建中, 谷计划. 基于OpenGL的渐开线弧齿锥齿轮三维参数化建模[J]. 工程设计学报, 2009, 16(6): 432-435.
[3] 张秀亲, 李瑞斌, 许恒伟. 双圆弧弧齿锥齿轮齿根应力沿齿长分布的研究[J]. 工程设计学报, 2002, 9(4): 215-218.