Please wait a minute...
工程设计学报  2009, Vol. 16 Issue (6): 406-410    
工程设计理论、方法与技术     
基于映射的产品装配建模技术研究
 田建平1, 张 旭2
1.四川理工学院 机械工程系, 四川 自贡 643000;2.北京理工大学 机械与车辆工程学院, 北京 100081
Research on product assembly modeling technology based on mapping
 TIAN  Jian-ping1, ZHANG  Xu2
1. Department of Mechanical Engineering, Sichuan University of Science & Engineering, Zigong 643000, China;
2. School of Mechanical & Vehicle Engineering, Beijing Institute of Technology, Beijing 100081, China
 全文: PDF(3852 KB)   HTML
摘要: 根据自顶向下的设计要求,提出基于映射技术的功能模型向装配模型的转换方法.通过信息实例化及规则表达,保证了映射技术的可行性.通过建立不同的实例库和Mapping表,较好实现了模型信息的转换.通过功能单元映射为装配单元,功能间约束映射为装配连接特征以及装配关系,实现了设计约束的自顶向下传递和功能设计与结构设计的集成.利用二叉树对模型交互进行装配序列化处理,保证了装配模型结构的完整性与可装配性.通过开发原型系统验证了该方法的可行性.
关键词: 映射技术装配特征装配模型装配关系功能约束     
Abstract: According to the requirement of top-down design, the transformation method from the function model to assembly model based on mapping was proposed. Through the information instantiation and rules expression, the feasibility of the mapping technique was guaranteed. Through establishing the different instance libraries and Mapping tables, transformation of the model information could be realized well. Through mapping the functional units to the assembly units, the functional constraints were mapped to the assembly connected feature and assembly relations, which realized the top-down transfer of design constraints and the integration of functional design & structural design. The assembly sequence was interactively processed using binary tree to model, and the structure integrity of assembly models and its assemblability were insured. Feasibility of this method was verified through the developed prototype system.
Key words: mapping technology    assembly feature    assembly model    assembly relation    functional constraint
出版日期: 2009-12-28
:  TP 391  
基金资助:

“十一五”总装预先研究支持项目资助(51318010201);过程装备与控制工程四川省高校重点实验室开放基金资助项目(GK200903)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
田建平
张旭

引用本文:

田建平, 张旭. 基于映射的产品装配建模技术研究[J]. 工程设计学报, 2009, 16(6): 406-410.

TIAN Jian-Ping, ZHANG Xu. Research on product assembly modeling technology based on mapping[J]. Chinese Journal of Engineering Design, 2009, 16(6): 406-410.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I6/406

[1] 杨化林, 邓芳, 翟红岩, 史俊友. 基于统一装配模型的模架设计技术研究[J]. 工程设计学报, 2009, 16(1): 38-43.
[2] 曹树坤, 黄克正. 基于功能表面的机械产品布局关系表达[J]. 工程设计学报, 2002, 9(2): 69-72.