Please wait a minute...
工程设计学报
工程设计学报  2008, Vol. 15 Issue (4): 308-312    
土木建筑工程设计     
悬索桥索股下料长度求解方法及其影响因素分析
梅秀道,汪正兴,秦建刚,崔清强,刘彦峰
中铁大桥局集团有限公司 武汉桥梁科学研究院， 湖北 武汉 430034
Method and impacting factors analysis in computing fabrication length of suspension bridge’s main cable strand
MEI Xiu-dao,WANG Zheng-xing, QIN Jian-gang,CUI Qing-qiang,LIU Yan-feng
Bridge Science Research Institute, China Zhongtie Major Bridge Engineering Group Co.，LTD, Wuhan  430034, China
 全文: PDF(317 KB)   HTML
摘要： 采用基于通用有限元软件ANSYS的二次开发语言APDL编程实现悬索桥主缆索股无应力索长的自动化求解,程序中根据中心索股空间坐标建立局部坐标系,在此坐标系内建立其他索股相对于中心索股的排列,建立主缆各索股各关键点之间的真实空间模型,考虑索鞍处的圆曲线修正,提取单元长度，得到各索股的真实索长．算例表明:恒载集度、控制点坐标误差、温度是主要影响因素,其他因素影响较小；同一索股内钢丝长度差值最大为6.75 cm．结果表明该方法计算精确、使用方便,应用于空间索面自锚式悬索桥等复杂结构的主缆无应力长度的求解工作时能有效减少工作量．
关键词： 悬索桥;  空间索面;  索股;  下料长度;  APDL语言    
Abstract: The automatic computation of non-stress length of the main cable strand of suspension bridge was implemented by programs developed by the second development language APLD of FEA commercials ANSYS. The local coordinates was established according to the central strand's spatial coordinates, and then the array of other strands relative to the central strand in the local coordinates was set up. Finally, the real spatial model between the key points of each strand in the main cable was built, which took into account the correction between line and circle at saddles, and then the real length of strand was got by picking-up all element's length. An example indicates that the crucial impacting factors include dead load, coordinates error of control points and temperature, and other factors' impact is small. The maximum length difference of steel wires in one strand is 6.75 cm. The result shows that this method is accurate and simple, and can be applied to complex structure such as the spatial cable net self-anchored suspension bridge to decrease job．
Key words: suspension bridge    spatial cable net    cable strand    fabrication length    APDL language
出版日期: 2008-08-28
:  U448.25  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
梅秀道
汪正兴
秦建刚
崔清强
刘彦峰

引用本文:

梅秀道,汪正兴,秦建刚,崔清强,刘彦峰. 悬索桥索股下料长度求解方法及其影响因素分析[J]. 工程设计学报, 2008, 15(4): 308-312.

MEI Xiu-dao,WANG Zheng-xing, QIN Jian-gang,CUI Qing-qiang,LIU Yan-feng. Method and impacting factors analysis in computing fabrication length of suspension bridge’s main cable strand[J]. Chinese Journal of Engineering Design, 2008, 15(4): 308-312.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2008/V15/I4/308

[1] 袁曾燕, 芮延年, 赵葵, 陈欢. 基于压电理论的悬索桥工作状况智能监测与诊断方法[J]. 工程设计学报, 2007, 14(6): 453-456.