Please wait a minute...
工程设计学报
工程设计学报  2008, Vol. 15 Issue (1): 16-20    
工程设计理论、方法与技术     
质量驱动的虚拟原型设计关键技术
 倪俊芳
苏州大学 机电工程学院， 江苏 苏州 215021
Research on key techniques of quality driven virtual prototype design
 NI  Jun-Fang
School of Mechanic and Electronic Engineering, Suzhou University, Suzhou 215021, China
 全文: PDF(323 KB)   HTML
摘要： 依据质量驱动的虚拟原型设计理论,构建基于ACIS的产品虚拟原型设计总体框架, 用C++开发了可从可视化数据库中读出实体, 再加以渲染产品的LINUX可视化系统,并建立了基于STEP标准的产品信息交换模型.在制造物理原型之前,可对产品全生命周期各个方面进行产品分析、评价、决策和修改,实现产品数据管理和设计进程的集成化.
关键词： 质量驱动;  原型设计;  数据交换;  产品模型    
Abstract: The framework of product virtual prototype design(VPD) based on ACIS 7.0 is constructed according to the theory of quality-driven VPD. The visualized system in which the entities are translated from visualized databases by Open Inventor 2.0 and the original objects are rendered by Renderizer 2.5 is developed by C++ in LINUX platform. Moreover, a product information exchange model based on STEP standard is established. Before manufacture of physical prototype, all stages of product life cycle can be analyzed, evaluated, decided and revised, and finally integration of product data management and design procedures is implemented.
Key words: quality driven    prototype design    data exchange    product modelling
出版日期: 2008-02-28
基金资助:

德国西门子公司资助项目（RPK20008302）；江苏省教育厅资助项目(Q2117042)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
倪俊芳

引用本文:

倪俊芳. 质量驱动的虚拟原型设计关键技术[J]. 工程设计学报, 2008, 15(1): 16-20.

NI Jun-Fang. Research on key techniques of quality driven virtual prototype design[J]. Chinese Journal of Engineering Design, 2008, 15(1): 16-20.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2008/V15/I1/16

[1] 余军合. 全生命周期产品和过程模型集成技术研究[J]. 工程设计学报, 2005, 12(3): 134-139.