Please wait a minute...
工程设计学报
工程设计学报  2007, Vol. 14 Issue (3): 262-268    
工程设计理论、方法与技术     
基于原始误差项快速辨识的空间几何误差补偿
李小力, 周云飞, 李斌
华中科技大学 国家数控系统工程技术研究中心， 湖北 武汉  430074
Volumetric error compensation based on rapid identification for NC machine tools
LI Xiao-li,  ZHOU Yun-fei, LI Bin
National NC System Engineering Research Center, Huazhong University of Science and Technology, Wuhan 430074, China
 全文: PDF(868 KB)   HTML
Abstract: The mapping relationships among the motion coordinate errors along nine single coordinate lines, the straightness error and 21 other initial error items, and the mapping relationships among the tool geometric errors related to work-piece space and initial error items are researched using laser interferometer for a three-axis machining center. Then, a nine-line measurement method and a volumetric error compensation method are put forward. Moreover, the rapid identification of initial error items and compensation of volumetric error are realized.
Key words: initial error item    rapid identification    volumetric error    multi-body kinematics    error compensation
出版日期: 2007-06-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

李小力, 周云飞, 李斌. 基于原始误差项快速辨识的空间几何误差补偿[J]. 工程设计学报, 2007, 14(3): 262-268.

LI Xiao-li, ZHOU Yun-fei, LI Bin. Volumetric error compensation based on rapid identification for NC machine tools[J]. Chinese Journal of Engineering Design, 2007, 14(3): 262-268.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2007/V14/I3/262

No related articles found!