Please wait a minute...
工程设计学报
工程设计学报  2006, Vol. 13 Issue (5): 286-290    
工程设计理论、方法与技术     
Q控制图初始性能的改进
 崔敬巍, 谢里阳
东北大学 机械工程与自动化学院， 辽宁 沈阳 110004
Improvement of initial performance of Q control chart
 CUI  Jing-Wei, XIE  Li-Yang
School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
 全文: PDF(298 KB)   HTML
摘要：   针对单值Q控制图在过程初始阶段所面临的突出问题，即检出力不强的弱点，提出一种改进单值Q控制图初始性能的质量控制图。它是建立在贝叶斯预测理论的基础上，应用在过程方差是未知的稳态生产过程的条件下。对控制图处于稳态和过程均值发生偏移时的性能及基于贝叶斯模型先验估计值对控制图的影响进行了讨论，结果表明控制图的特性适用于监视稳定生产过程的初始阶段，而这种特性恰好弥补了Q控制图在初始阶段性能不佳的弱点。
关键词： SPC;  Q控制图;  灵敏性;  贝叶斯模型;  先验估计;  检出力    
Abstract: Aiming at the remarkable problem confronting individual Q control chart during start-up phase-poor detection ability, a quality control chart improving initial performance of individual Q control chart is presented. This chart is established on the basis of Bayesian forecasting and dynamic model and is applied to a stable process during which process variance is unknown. Performance ofthis chart when the process was in a statistical stable state and the mean of the process had a drift and its effects when Bayesian dynamic models have different pre-estimated values are discussed. The results indicate that property of this chart can be applied to monitor the start-up phase during stable process well, which compensates the drawbacks of Q control chart.
Key words: SPC    Q control chart    sensitivity    Bayesian model    prior estimatordetection power
出版日期: 2006-10-28
基金资助:

国家自然科学基金资助项目(50275025)；高等学校博士学科点专项科研基金资助项目(20050145027)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
崔敬巍
谢里阳

引用本文:

崔敬巍, 谢里阳. Q控制图初始性能的改进[J]. 工程设计学报, 2006, 13(5): 286-290.

CUI Jing-Wei, XIE Li-Yang. Improvement of initial performance of Q control chart[J]. Chinese Journal of Engineering Design, 2006, 13(5): 286-290.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I5/286

[1] 王晨光, 张健, 包能胜, 顾佩华. 制杯机五孔斜排双曲肘合模机构的稳健设计研究[J]. 工程设计学报, 2010, 17(1): 30-34.
[2] 孙秋霞, 高齐圣, 赵建立. 带有质量特性约束的SPC与EPC集成控制的经济设计[J]. 工程设计学报, 2009, 16(6): 411-414.