Please wait a minute...
工程设计学报
工程设计学报  2005, Vol. 12 Issue (3): 163-166    
工程设计理论、方法与技术     
双工位清洗机智能检测DCS系统的实现
 潘双夏, 娄小冬
浙江大学 机械设计研究所， 浙江 杭州 310027
Realization of intelligent measuring DCS-system for clean-washing machine with dual-workstation
 PAN  Shuang-Xia, LOU  Xiao-Dong
Institute of Mechanic Design, Zhejiang University, Hangzhou 310027, China
 全文: PDF(284 KB)   HTML
摘要： 针对国内清洗机检测完全人工化、效率低下的状况，开发了基于高性能、高集成度ATmega16单片机的智能清洗机检测DCS系统，实现了双工位清洗机检测工艺流程自动化、性能参数的实时采集及数据集中管理，并利用电能计量专用芯片CS5460A实现了电压、电流及功率因数等电参数测量高度集成化，提高了清洗机检测系统的可靠性、生产效率和质量管理水平。
关键词： DCS;  智能检测;  清洗机;  电参量    
Abstract: Aiming at the domestic condition that the measuring procedure of cleaning-washing machine is fully manual and seriously inefficient, an intelligent measuring DCS-system, based on high performance and high integration of MCU—ATmega16, is developed. Automation of measuring procedure, real-time sampling parameters and concentrated data management of cleaning-washing machines with dual-workstation are implemented. The reliability, productivity and quality management level are greatly enhanced by adopting CS5460A—a special IC for power measuring—to achieve high integration of the electric parameters such as U, I and cosφ.
Key words: DCS    intelligent measuring    clean-washing    power parameter
出版日期: 2005-06-28
基金资助:

国家自然科学基金重点资助项目(50335040)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
潘双夏
娄小冬

引用本文:

潘双夏, 娄小冬. 双工位清洗机智能检测DCS系统的实现[J]. 工程设计学报, 2005, 12(3): 163-166.

PAN Shuang-Xia, LOU Xiao-Dong. Realization of intelligent measuring DCS-system for clean-washing machine with dual-workstation[J]. Chinese Journal of Engineering Design, 2005, 12(3): 163-166.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2005/V12/I3/163

[1] 袁曾燕, 芮延年, 赵葵, 陈欢. 基于压电理论的悬索桥工作状况智能监测与诊断方法[J]. 工程设计学报, 2007, 14(6): 453-456.
[2] 陈国平, 文庆明. 往复式轧钢机清洗机的研制[J]. 工程设计学报, 2002, 9(1): 41-43.