Please wait a minute...
工程设计学报
工程设计学报  2001, Vol. 8 Issue (2): 96-100    
工程设计理论、方法与技术     
异形仪表圆弧齿轮滚刀齿形的设计计算
 张翔1, 陈文华2, 赵玉林1, 朱海峰2, 靳哲锋2
1.杭州手表有限公司,浙江杭州310002;
 2.浙江大学机械工程学系,浙江杭州310027
Design and Computation of Hob's Tooth Profile for Special Shape Instrument Circular Arc Gear
 ZHANG  Xiang1, CHEN  Wen-Hua2, ZHAO  Yu-Lin1, ZHU  Hai-Feng2, JIN  Zhe-Feng2
1.Hangzhou Watch Company Limited, Hangzhou 310002, China;
2.Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(166 KB)   HTML
摘要： 在异形仪表圆弧齿轮几何尺寸计算的基础上,按照共轭齿条齿廓的存在条件,提出了滚刀滚动圆半径的选择方法;其次,按照齿形法线法的原理,提出了异形仪表圆弧齿轮滚刀齿形的设计计算方法,推导了设计异形仪表圆弧齿轮滚刀齿形的全部公式;最后,以某型女式机械表的周历轮为例,进行了滚刀齿形的设计计算,结果表明,由此加工制作的滚刀所滚切的齿轮,经检验完全满足设计要求.
关键词： 异形齿轮;  仪表圆弧齿轮;  滚刀设计    
Abstract:  Authors present the dimension expressions of special instrument circular arc gear, and propose a selective method of hob' s rolling circle radius according as conjugate rack profiles existe or not. Then, according to the principle of tooth normal technique, authors propose a design method of hob' s tooth profiles for special instrument circle arc gear, and deduced all formulae used to design hob' s tooth profiles. Eventually, Authors take week-calendar wheel used in woman' s mechanical watch as an example, design the hob' s tooth profiles. The gears, which is cut with the hobs designed above, can satisfy all design demands completely.
Key words:  special shape gear    instrument circular arc gear    hob design
出版日期: 2001-06-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
张翔
陈文华
赵玉林
朱海峰
靳哲锋

引用本文:

张翔, 陈文华, 赵玉林, 朱海峰, 靳哲锋. 异形仪表圆弧齿轮滚刀齿形的设计计算[J]. 工程设计学报, 2001, 8(2): 96-100.

ZHANG Xiang, CHEN Wen-Hua, ZHAO Yu-Lin, ZHU Hai-Feng, JIN Zhe-Feng. Design and Computation of Hob's Tooth Profile for Special Shape Instrument Circular Arc Gear[J]. Chinese Journal of Engineering Design, 2001, 8(2): 96-100.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2001/V8/I2/96

No related articles found!