Please wait a minute...
工程设计学报
工程设计学报  2001, Vol. 8 Issue (1): 37-42    
工程设计理论、方法与技术     
液压控制集成块的产品模型化——提高工程设计效率的一条途径
B.Pott, D.G.Feldmann
翻译:吴根茂　　译校:陈　鹰
Product Models for Hydraulic Manifolds—An Approach for More Efficient Engineering Design
 全文: PDF(260 KB)   HTML
摘要： 为了提高效率,专用的CAD系统(例如液压控制集成块的设计系统)应能扩展到整个系统的设计和检验。本文介绍这样的一个设计系统,它是基于各种液压元件产品模型各种数据的处理,其中不仅处理几何尺寸,而且还包括为进一步扩展功能所需要的技术上和管理上的各种信息。
Abstract: To create a higher efficiency a CAD tool must be extended for special tasks,e.g.the design of hydraulic manifolds,so that some of the calculations and constraint checking can be done within the program.This paper presents such a design system that is based on product models for hydrostatic components.It handles not only geometric data but also technical and administrative data that are necessary for the extended functionality.
出版日期: 2001-03-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
B.Pott
D.G.Feldmann

引用本文:

B.Pott, D.G.Feldmann. 液压控制集成块的产品模型化——提高工程设计效率的一条途径[J]. 工程设计学报, 2001, 8(1): 37-42.

B.Pott , D.G.Feldmann . Product Models for Hydraulic Manifolds—An Approach for More Efficient Engineering Design[J]. Chinese Journal of Engineering Design, 2001, 8(1): 37-42.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2001/V8/I1/37

No related articles found!