Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (2): 28-31    
工程设计理论、方法与技术     
基于产品配合图的装配顺序自动规划
 李原, 曹哲, 张涛, 杨海成
西北工业大学CAD/ CAM 国家专业实验室, 陕西西安 710072
Research on Assembly Sequence Planning Based on Mating Conditions
 LI  Yuan, CAO  Zhe, ZHANG  Tao, YANG  Hai-Cheng
State Laboratory of CAD/ CAM, Northwestern Polytechnical Univ ersity, Xi'an 710072, China
 全文: PDF(183 KB)   HTML
摘要： 装配顺序规划( ASP) 是基于装配建模的装配工艺顺序的自动规划生成, 是DFA( 面向装配的设计) 的关键技术之一。本文采用配合条件法进行装配顺序求解, 装配体采用其部件与部件间的配合关系来描述, 从部件间的配合关系可得到其装配体配合图。本文还在原算法的基础上添加了一些约束来降低算法的计算量, 使得算法更为简洁。该法在AutoCAD®设计平台上实现, 并采用装配体实例加以检验。
关键词： 装配顺序规划;  装配约束;  配合图    
Abstract: Assembly Sequence Planning( ASP) is automatic generation of assembly procedure based on assembly modeling . And the research ofASP is one of the key techniques of DFA. T his paper chooses the algorithm of mat ing condit ions to solve the problem. In this work, the components of an assembly and their mutual relat ions in this assembly, especially the mat ing condit ions, describe the assembly. From the mat ing condit ions of the components, an assembly procedure is generated in two steps. The paper adds some constraints to low er the amount of the calculat ion of the original algorithm, making the algorithm more consummate.
Key words: assembly sequence planning    assembly constraints    mating graph
出版日期: 2000-06-01
基金资助:

航空基础科学基金资助项目( 97H53112 ,98H53067) ; 863/ CIMS 资助项目( 863-511-842-009)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
李原
曹哲
张涛
杨海成

引用本文:

李原, 曹哲, 张涛, 杨海成. 基于产品配合图的装配顺序自动规划[J]. 工程设计学报, 2000, 7(2): 28-31.

LI Yuan, CAO Zhe, ZHANG Tao, YANG Hai-Cheng. Research on Assembly Sequence Planning Based on Mating Conditions[J]. Chinese Journal of Engineering Design, 2000, 7(2): 28-31.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I2/28

[1] 马红琴，彭庆金，张 健，顾佩华. 开放式构架产品装配序列规划[J]. 工程设计学报, 2015, 22(6): 509-519.