Please wait a minute...
工程设计学报
工程设计学报  2020, Vol. 27 Issue (3): 398-406    DOI: 10.3785/j.issn.1006-754X.2020.00.043
整机和系统设计     
一种智能传感器系统的设计
阮永超, 刘武发, 郑鹏
郑州大学 机械与动力工程学院， 河南 郑州 450001
Design of an intelligent sensor system
RUAN Yong-chao, LIU Wu-fa, ZHENG Peng
School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China
 全文: PDF(1672 KB)   HTML
摘要： 随着传感器的广泛使用和网络技术的发展，智能传感器系统成为传感器发展的一种趋势。参考IEEE 1451.2标准，设计了基于STM32F103的智能传感器系统，它包括智能传感器模块、网络适配器模块、上位机等硬件及相应的运行软件。智能传感器模块采用IIC（inter-integrated circuit，内部集成电路总线)与网络适配器模块通信；网络适配器模块采用Wi-Fi与上位机通信，并作为智能传感器模块和上位机之间通信的桥梁。实验结果表明：智能传感器模块内部能够存储模块自身与传感器的信息，并实现传感器的即插即用；网络适配器模块能够实现智能传感器模块的即插即用；上位机能够实现指令发送和结果接收与管理，并实时监测其与网络适配器模块的连接状态。该智能传感器系统可实现无线远程监测，摆脱了线缆的束缚，能够适应更多的监测场景；能够读取传感器的信息，从而对传感器进行识别，并兼容不同类型的传感器；能够实现传感器的自校准功能，使测量结果更加准确。研究结果可以为大型智能传感器系统的研制和应用提供参考。
关键词： 网络化;  Wi-Fi;  传感器系统;  IIC;  即插即用    
Abstract: With the widely use of the sensor and the development of network techniques, Intelligent sensor system becomes a growing trend of sensor. According to the IEEE 1451.2 standard, an intelligent sensor system based on STM32F103 was designed, including an intelligent sensor module, a network adapter module, an upper computer and their corresponding running softwares. The intelligent sensor module used IIC to communicate with the network adapter module while the network adapter module used Wi-Fi to communicate with the upper computer and acted as the communication bridge between the intelligent sensor module and the upper computer. Experimental results showed that the intelligent sensor module could store the information of itself and the sensor, and realize the plug-and-play capability of the sensor. Besides, the network adapter module could make the intelligent sensor module achieve its plug-and-play capability. Moreover, the upper computer could realize instruction sending, result receiving and managing, as well as achieve real-time monitoring of the connection status between itself and the network adapter module. The intelligent sensor system realized wireless remote monitoring, getting rid of the shackles of cables, so it could adapt to more monitoring scenarios. It could read the information of the sensor itself, so as to identify the sensor and compatible with different types of sensors. It could also realize the self-calibration function of the sensor, so that the measurement results could be more accurate. The research results can provide reference for the development and application of large intelligent sensor system.
Key words: networking    Wi-Fi    sensor system    IIC    plug-and-play
收稿日期: 2019-11-28 出版日期: 2020-06-28
CLC:  TP 212  
基金资助: 国家自然科学基金资助项目（51775515）
通讯作者: 刘武发（1963—），男，河南新蔡人，教授，博士，从事机电控制技术研究,E-mail：wufaliu@126.com，https://orcid.org/0000-0003-1414-5385     E-mail: wufaliu@126.com
作者简介: 阮永超（1992—），男，河南尉氏人，硕士生，从事智能测量技术研究,E-mail：765864012@qq.com，https://orcid.org/0000-0003-2564-7997。
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
阮永超
刘武发
郑鹏

引用本文:

阮永超, 刘武发, 郑鹏. 一种智能传感器系统的设计[J]. 工程设计学报, 2020, 27(3): 398-406.

RUAN Yong-chao, LIU Wu-fa, ZHENG Peng. Design of an intelligent sensor system. Chinese Journal of Engineering Design, 2020, 27(3): 398-406.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2020.00.043    或    https://www.zjujournals.com/gcsjxb/CN/Y2020/V27/I3/398

1 段文浩. IEEE 1451.2 智能变送器接口模块的研究与设计[D].秦皇岛：燕山大学,2012：42-44. DUAN Wen-hao. Study and design of smart transducer interface module based on IEEE 1451.2 standard[D]. Qinhuangdao： Yanshan University, 2012：42-44.
2 TC-9, Committee on Sensor Technology of the IEEE Instrumentation and Measurement Society. IEEE standard for a smart transducer interface for sensors and actuators-transducer to microprocessor communication protocols and transducer electronic data sheet (TEDS) formats：IEEE Std 1451.2-1997[S]. New York： IEEE，1997： 49-97. doi：10.1109/ieeestd.1998.88285
3 郑培亮.基于ARM的IEEE 1451智能称重传感器设计[D].广州：华南理工大学，2011：23-24.
[1] 曹礼勇, 钟永彦, 陈娟, 华亮. 基于BLE和Wi-Fi的建筑能耗监测系统设计[J]. 工程设计学报, 2021, 28(5): 654-661.
[2] 余强, 张海盛, 梁丽. 基于能力的制造资源模型研究[J]. 工程设计学报, 2006, 13(1): 13-16.
[3] 张友良, 汪惠芬. 异地协同设计制造关键技术及系统实现[J]. 工程设计学报, 2002, 9(2): 53-59.