Mechanics and Mechanical Engineering |
|
|
|
|
A simple approach for determining the preload of a wire race ball bearing |
Xiao-biao Shan, Li-li Wang, Tao Xie, Wei-shan Chen |
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China, College of Science, Northeast Forestry University, Harbin 150040, China |
|
|
Abstract Wire race ball bearings have been widely used in high-tech weapons. The preload of a wire race ball bearing is crucial in engineering applications. In this study, a more effective approach is proposed for exact determination of the wire race ball bearing preload. A new mathematical model of the preload and the starting torque of the wire race ball bearing was built using the theorem of the 3D rolling friction resistance and the non-conforming contact theory. Employing a wire race ball bearing with a 1000 mm diameter used in a specific type of aircraft simulating rotary table, the numerical analysis in MATLAB® showed that the preload magnitude can be controlled in the range of 130–140 μm. As verification, the experimental results were in agreement with the theoretical results, and confirm the feasibility of this method. This new approach is more exact in the preload range of 10–158 μm than that computed by the numerical method reported in our previous work (Shan et al., 2007b). This implies that the present method contributes to more effectively preventing rolling noise, overturning moments and wear of the wire race ball bearing. The current research provides critical technical support for the engineering application of wire race ball bearings with large diameters.
|
Received: 25 September 2009
Published: 06 July 2010
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|