Please wait a minute...
ZJUS-A
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2001, Vol. 2 Issue (1): 34-40    DOI: 10.1631/jzus.2001.0034
Science & Engineering     
ENGINEERING ASPECTS OF LANDFILLING MUNICIPAL SOLID WASTE
HU Min-yun, CHEN Yun-min
Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Sanitary landfilling is the most important method of municipal solid waste disposal in China. Landfill sites are always set up in mountain valley, on plain or beside seashore. A complete landfill consists of base system, cover system, and leachate collection and gas extraction system. This paper reviews the state-of-the-art landfilling technology in China and collection discusses research projects for engineers.

Key words： municipal solid waste      sanitary landfill      final cover      base      leachate      landfill gas     
Received: 02 April 2000     
CLC:  X705  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
CHEN Yun-min
HU Min-yun
Cite this article:

HU Min-yun, CHEN Yun-min. ENGINEERING ASPECTS OF LANDFILLING MUNICIPAL SOLID WASTE. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2001, 2(1): 34-40.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2001.0034     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2001/V2/I1/34

[1] Chi Guan, Hai-jian Xie, Zhan-hong Qiu, Yun-min Chen, Pei-xiong Chen. One-dimensional coupled model for landfill gas and water transport in layered unsaturated soil cover systems[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(8): 667-676.
[2] Hui Xu, Liang-tong Zhan, He Li, Ji-wu Lan, Yun-min Chen, Hai-yan Zhou. Time- and stress-dependent model for predicting moisture retention capacity of high-food-waste-content municipal solid waste: based on experimental evidence[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(7): 525-540.
[3] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[4] Vibhor Trehan, Craig Chapman, Pathmeswaran Raju. Informal and formal modelling of engineering processes for design automation using knowledge based engineering[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(9): 706-723.
[5] Jian Zhang, Ji-en Ma, Xiao-yan Huang, You-tong Fang, He Zhang. Optimal condition-based maintenance strategy under periodic inspections for traction motor insulations[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 597-606.
[6] Xiao-dong Li, Yong Ren, Sha-sha Ji, Xia-li Hou, Tong Chen, Sheng-yong Lu, Jian-hua Yan. Emission characteristics of hazardous components in municipal solid waste incinerator residual ash[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(4): 316-325.
[7] Hui-mei Zhu, Pei-ming Wang, Guo-fang Zhang. Influence of vinyl acetate/ethylene copolymer powder on secondary efflorescence in Portland cement-based decorative mortar[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(2): 143-150.
[8] Jia-jin Zhou, Xiao-nan Gong, Kui-hua Wang, Ri-hong Zhang. A field study on the behavior of static drill rooted nodular piles with caps under compression[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(12): 951-963.
[9] Jing Xu, David J. Corr, Surendra P. Shah. Nanomechanical properties of C-S-H gel/cement grain interface by using nanoindentation and modulus mapping[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 38-46.
[10] Jian Wang, Wen-xiong Wang. Significance of physicochemical and uptake kinetics in controlling the toxicity of metallic nanomaterials to aquatic organisms[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(8): 573-592.
[11] Yao-zhi Luo, Chao Yang. A vector-form hybrid particle-element method for modeling and nonlinear shell analysis of thin membranes exhibiting wrinkling[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(5): 331-350.
[12] Wen-feng Gan, Jian-zhong Fu, Hong-yao Shen, Zhi-wei Lin. A morphing machining strategy for artificial bone[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(3): 157-171.
[13] David Poto?nik, Bojan Dol?ak, Miran Ulbin. GAJA: 3D CAD methodology for developing a parametric system for the automatic (re)modeling of the cutting components of compound washer dies[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(5): 327-340.
[14] Maziar Ramezani, Juan Vilches, Thomas Neitzert. Evaluation of the pull-out strength of galvanised steel strips in a cement-based material[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(12): 843-855.
[15] Zheng-wu Jiang, Wen-ting Li, Zi-long Deng, Zhi-guo Yan. Experimental investigation of the factors affecting accuracy and resolution of the pore structure of cement-based materials by thermoporometry[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(10): 720-730.