Please wait a minute...
ZJUS-A
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2004, Vol. 5 Issue (8): 918-922    DOI: 10.1631/jzus.2004.0918
Materials & Chemical Science     
Study on Bombyx mori silk treated by oxygen plasma
CHEN Yu-yue, LIN Hong, REN Yu, WANG Hong-wei, ZHU Liang-jun
College of Material Engineering, Suzhou University, Suzhou 215021, China; College of Animal Sciences, Zhejiang University, Hangzhou 310029, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Study of the morphology, aggregation structure and properties of Bombyx morisilk treated by low temperature oxygen plasma showed that slight flutes appeared on the surface of Bombyx mori silk fiber and that its surface structure changed after plasma treatment. The conformation also changed and crystalline degree decreased. The stannic filling rate of treated fiber was improved. Because of etching, the weight of the fiber decreased but the breaking strength changed little after short-time treatment.

Key words： Oxygen plasma      Bombyx mori silk      Morphology      Structure      Properties     
Received: 28 September 2003     
CLC:  TS102.3+3  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
CHEN Yu-yue
LIN Hong
REN Yu
WANG Hong-wei
ZHU Liang-jun
Cite this article:

CHEN Yu-yue, LIN Hong, REN Yu, WANG Hong-wei, ZHU Liang-jun. Study on Bombyx mori silk treated by oxygen plasma. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2004, 5(8): 918-922.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2004.0918     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2004/V5/I8/918

[1] Zhen-yu Wang, Yang Zhao, Guo-wei Ma, Zhi-guo He. A numerical study on the high-velocity impact behavior of pressure pipes[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(6): 443-453.
[2] Sr?an M. Bo?njak, Neboj?a B. Gnjatovi?, Sreten D. Savi?evi?, Milorad P. Panteli?, Ivan Lj. Milenovi?. Basic parameters of the static stability, loads and strength of the vital parts of a bucket wheel excavator’s slewing superstructure[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(5): 353-365.
[3] Peng-cheng Yang, Yan-bin Shen, Yao-zhi Luo. Active structures integrated with wireless sensor and actuator networks: a bio-inspired control framework[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(4): 253-272.
[4] Xiao-ping Ouyang, Xu Fang, Hua-yong Yang. An investigation into the swash plate vibration and pressure pulsation of piston pumps based on full fluid-structure interactions[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(3): 202-214.
[5] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[6] Usama Umer, Jaber Abu Qudeiri, Mohammad Ashfaq, Abdulrahman Al-Ahmari. Chip morphology predictions while machining hardened tool steel using finite element and smoothed particles hydrodynamics methods[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 873-885.
[7] Jin-yu Zhou, Wu-jun Chen, Bing Zhao, Zhen-yu Qiu, Shi-lin Dong. Distributed indeterminacy evaluation of cable-strut structures: formulations and applications[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(9): 737-748.
[8] Guo-huan Bao, Yi Chen, Ji-en Ma, You-tong Fang, Liang Meng, Shu-min Zhao, Xin Wang, Jia-bin Liu. Microstructure and properties of cold drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe alloys[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 622-629.
[9] Yue Wu, Zhao-qing Chen, Xiao-ying Sun. Research on the wind-induced aero-elastic response of closed-type saddle-shaped tensioned membrane models[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 656-668.
[10] Jie Shan, Li Wang, Hao-jie Yu, Yu-lei Tai, Muhammad Akram. Synthesis and characterization of magnetic porous Fe3O4/poly(methylmethacrylate-co-divinylbenzene) microspheres and their use in removal of Rhodamine B[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 669-679.
[11] Yuan-qing Wang, Xiao-wei Liao, Yuan-yuan Zhang, Yong-jiu Shi. Experimental study on the through-thickness properties of structural steel thick plate and its heat-affected zone at low temperatures[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(3): 217-228.
[12] Xing-huai Huang, Shirley Dyke, Zhao-dong Xu. An in-time damage identification approach based on the Kalman filter and energy equilibrium theory[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(2): 105-116.
[13] Ming-xue Shen, Jin-peng Zheng, Xiang-kai Meng, Xiao Li, Xu-dong Peng. Influence of Al2O3 particles on the friction and wear behaviors of nitrile rubber against 316L stainless steel[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(2): 151-160.
[14] Yury Derbin, James Walker, Dariusz Wanatowski, Alec Marshall. Soviet experience of underground coal gasification focusing on surface subsidence[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 839-850.
[15] Kah Yen Foong, U. Johnson Alengaram, Mohd Zamin Jumaat, Kim Hung Mo. Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 59-69.