Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2009, Vol. 10 Issue (11): 1670-1677    DOI: 10.1631/jzus.A0820648
Chemical and Energy Engineering     
Emission and drying kinetics of paper mill sludge during contact drying process
Wen-yi DENG, Xiao-dong LI, Jian-hua YAN, Fei WANG, Sheng-yong LU, Yong CHI, Ke-fa CEN
State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The emission and contact drying kinetics of the paper mill sludge (PMS) were studied through experiments carried out in a paddle dryer. To get a better understanding of its drying mechanism, a penetration model developed by Tsotsas and Schlünder (1986) was used to simulate the drying kinetics of the PMS. The result indicated that this kinetics could be divided into three phases: pasty, lumpy and granular phases, and could be successfully simulated by the penetration model as the related sludge parameters were integrated into the model. The emission rate curves of the volatile compounds (VCs) were interrelated to the drying rate curve of the PMS, especially for volatile fatty acids (VFAs) and ammonia in this study.

Key wordsContact drying      Emission      Paper mill sludge (PMS)      Paddle dryer     
Received: 07 September 2008     
CLC:  X705  
Cite this article:

Wen-yi DENG, Xiao-dong LI, Jian-hua YAN, Fei WANG, Sheng-yong LU, Yong CHI, Ke-fa CEN. Emission and drying kinetics of paper mill sludge during contact drying process. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(11): 1670-1677.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A0820648     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2009/V10/I11/1670

[1] Hao-tong Wang, Zheng-liang Huang, Zu-wei Liao, Bin-bo Jiang, Jing-dai Wang, Yong-rong Yang, Guo-dong Han, Bao-zhu Yang. From noise to information: a new technology of olefin polymerization fluidized bed reactor based on acoustic emission[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(4): 245-255.
[2] Feng Yin, Zhi-hao Luo, Yuan Li, Ming-xi Zhou, Hao Zhou. Coal type identification based on the emission spectra of a furnace flame[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(2): 113-123.
[3] Dong-wei Yao, Feng Wu, Xin-Lei Wang. Impact of diesel emission fluid soaking on the performance of Cu-zeolite catalysts for diesel NH3-SCR systems[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(4): 325-334.
[4] Qing-yu Zhang, Xin-xing Li, Wei-li Tian, Ang-yi Fu, Wei-fei Du, Cui Wang. Scenarios for vehicular air pollutant emissions abatement: a case study in Hangzhou, China[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(9): 753-760.
[5] Yun Shi, Yin-feng Xia, Bi-hong Lu, Nan Liu, Lei Zhang, Su-jing Li, Wei Li. Emission inventory and trends of NOx for China, 2000–2020[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(6): 454-464.
[6] Ni-jie Jing, Qin-hui Wang, Yu-kun Yang, Le-ming Cheng, Zhong-yang Luo, Ke-fa Cen. Influence of ash composition on the sintering behavior during pressurized combustion and gasification process[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(3): 230-238.
[7] Yu-mei Wei, Wei-li Tian, Ying-yue Zheng, Qing-yu Zhang, Lei Jiang, Zu-cheng Wu. Modelling of urban ambient N, N-dimethylformamide concentrations in a small-scale synthetic leather industrial zone[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(5): 374-389.
[8] Cong-jing Ren, Jing-dai Wang, Di Song, Bin-bo Jiang, Zu-wei Liao, Yong-rong Yang. Determination of particle size distribution by multi-scale analysis of acoustic emission signals in gas-solid fluidized bed[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(4): 260-267.
[9] Bülent ÖZDALYAN, Oğuzhan DOĞAN. Effect of a semi electro-mechanical engine valve on performance and emissions in a single cylinder spark ignited engine[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(2): 106-114.
[10] Yi-jia CAO, Jing-dai WANG, Wei LIU, Yong-rong YANG. Wall sheeting diagnosis in fluidized beds based on chaos analysis of acoustic emission signals[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(9): 1341-1349.
[11] Guo-neng LI, Hao ZHOU, Ke-fa CEN. Emission characteristics and combustion instabilities in an oxy-fuel swirl-stabilized combustor[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(11): 1582-1589.
[12] CHEN Ling-hong, ROZE Claude, GARO Annie, GIRASOLE Thierry, CEN Ke-fa, GREHAN Gérard. Semi-analytical Monte Carlo simulation of laser-induced fluorescence propagation in an optically participating spray[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(7): 1170-1178.
[13] ZHANG Qing-yu, WEI Yu-mei, CHEN Ying-xu, GUO Hui. Environmental damage costs from fossil electricity generation in China, 2000~2003[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(11): 1816-1825.
[14] DANESHVAR Sabalan, GHASSEMIAN Hassan. MRI and PET images fusion based on human retina model[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(10): 1624-1632.
[15] Schifter I., Díaz L., Lopez-salinas E.. Ozone forming potential and sulfur effects on in-use vehicles of the metropolitan area of Mexico City[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(3): 463-471.