Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2007, Vol. 8 Issue (7): 1044-1052    DOI: 10.1631/jzus.2007.A1044
Mechanics & Civil Engineering     
Effect of boundary conditions and convection on thermally induced motion of beams subjected to internal heating
MALIK Pravin, KADOLI Ravikiran, GANESAN N.
Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, Srinivasnagar, 575025, India; Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Numerical exercises are presented on the thermally induced motion of internally heated beams under various heat transfer and structural boundary conditions. The dynamic displacement and dynamic thermal moment of the beam are analyzed taking into consideration that the temperature gradient is independent as well as dependent on the beam displacement. The effect of length to thickness ratio of the beam on the thermally induced vibration is also investigated. The type of boundary conditions has its influence on the magnitude of dynamic displacement and dynamic thermal moment. A sustained thermally induced motion is observed with progress of time when the temperature gradient being evaluated is dependent on the forced convection generated due to beam motion. A finite element method (FEM) is used to solve the structural equation of motion as well as the heat transfer equation.

Key wordsThermal induced oscillations      Natural convection      Forced convection      Finite element analysis     
Received: 24 October 2006     
CLC:  TU34  
Cite this article:

MALIK Pravin, KADOLI Ravikiran, GANESAN N.. Effect of boundary conditions and convection on thermally induced motion of beams subjected to internal heating. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(7): 1044-1052.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2007.A1044     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2007/V8/I7/1044

[1] Yao-bin Zhuo, Xue-yan Xiang, Xiao-jun Zhou, Hao-liang Lv, Guo-yang Teng. A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(5): 377-392.
[2] Chih-Hung Chen, Hsuan-Teh Hu, Fu-Ming Lin, Hsin-Hsin Hsieh. Residual stress analysis and bow simulation of crystalline silicon solar cells[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(1): 49-58.
[3] Yong-hua Huang, Qiang Chen. Numerical investigation on thermal effects by adding thin compartmental plates into cooling enclosures with heat-leaking walls[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(6): 485-496.
[4] Hsuan-Teh Hu, Shih-Tsung Tseng, Alice Hu. Finite element modeling of superplastic co-doped yttria-stabilized tetragonal-zirconia polycrystals[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(12): 989-999.
[5] Jiang Lu, Li-wu Fan, Yi Zeng, Yu-qi Xiao, Xu Xu, Zi-tao Yu. Effect of the inclination angle on the transient performance of a phase change material-based heat sink under pulsed heat loads[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(10): 789-797.
[6] Jin Zhang, Qing-feng Xu, Yi-xiang Xu, Bin Wang, Jing-xiang Shang. A numerical study on fire endurance of wood beams exposed to three-side fire[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(7): 491-505.
[7] Hong-yan Wang, Xiao-biao Shan, Tao Xie. An energy harvester combining a piezoelectric cantilever and a single degree of freedom elastic system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(7): 526-537.
[8] Zan Wu, Wei Li, Zhi-jian Sun, Rong-hua Hong. Modeling natural convection heat transfer from perforated plates[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(5): 353-360.
[9] Hai-tao Li, Andrew John Deeks, Li-xin Liu, Dong-sheng Huang, Xiao-zu Su. Moment transfer factors for column-supported cast-in-situ hollow core slabs[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(3): 165-173.
[10] Chen-xi Xing, Hao Wang, Ai-qun Li, Ji-rong Wu. Design and experimental verification of a new multi-functional bridge seismic isolation bearing[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(12): 904-914.
[11] Al Emran Ismail, Ahmad Kamal Ariffin, Shahrum Abdullah, Mariyam Jameelah Ghazali, Mohammed Abdulrazzaq, Ruslizam Daud. Stress intensity factors under combined bending and torsion moments[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(1): 1-8.
[12] Tie-yu Gao, Dong-fang Yang, Feng Cao, Jin-cheng Jiao. Temperature and thermodynamic deformation analysis of the rotors on a twin screw multiphase pump with high gas volume fractions[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(9): 720-730.
[13] Daisuke Maruyama, Hitoshi Kimura, Michihiko Koseki, Norio Inou. Driving force and structural strength evaluation of a flexible mechanical system with a hydrostatic skeleton[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(4): 255-262.
[14] Peng-fei Zhao, Fu-lin Shang. Experimental study on the interfacial delamination in a thermal barrier coating system at elevated temperatures[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(10): 794-803.
[15] Cheng-zhi FAN, Ming-xing HUANG, Yun-yue YE. Research and industrial application of a novel compound permanent magnet synchronous machine[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(4): 471-477.