Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2006, Vol. 7 Issue (Supplement 2): 219-222    DOI: 10.1631/jzus.2006.AS0219
Original Paper     
Value reduction algorithm in rough sets based on association rules support
Ma Yu-Liang, Yan Wen-Jun
School of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Aiming at value reduction, a sort of RSVR algorithm was presented based on support in association rules via Apriori algorithm. A more effective reduction table can be obtained by deleting those rules with less support according to least support— minsup. The reduction feasibility of this algorithm was achieved by reducing the given decision table. Testing by UCI machine learning database and comparing this algorithm with least value reduction algorithm indicate the validity of RSVR algorithm.

Key wordsAssociation rules      Value reduction      Support      Rough sets     
Received: 02 March 2006     
CLC:  TP391  
Cite this article:

Ma Yu-Liang, Yan Wen-Jun. Value reduction algorithm in rough sets based on association rules support. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(Supplement 2): 219-222.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2006.AS0219     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2006/V7/ISupplement 2/219

[1] Wei-teng Li, Ning Yang, Ting-chun Li, Yu-hua Zhang, Gang Wang. A new approach to simulate the supporting arch in a tunnel based on improvement of the beam element in FLAC3D[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(3): 179-193.
[2] Wei Liu, Bettina Albers, Yu Zhao, Xiao-wu Tang. Upper bound analysis for estimation of the influence of seepage on tunnel face stability in layered soils[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 886-902.
[3] She-rong Zhang, An-kui Hu, Chao Wang. Three-dimensional inversion analysis of an in situ stress field based on a two-stage optimization algorithm[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(10): 782-802.
[4] Wen-yang Duan, Li-min Huang, Yang Han, Ya-hui Zhang, Shuo Huang. A hybrid AR-EMD-SVR model for the short-term prediction of nonlinear and non-stationary ship motion[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(7): 562-576.
[5] Pijush Samui, Dookie Kim, Bhairevi G. Aiyer. Pullout capacity of small ground anchor: a least square support vector machine approach[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(4): 295-301.
[6] Rui Zhou, Zhou-hong Zong, Xue-yang Huang, Zhang-hua Xia. Seismic response study on a multi-span cable-stayed bridge scale model under multi-support excitations. Part II: numerical analysis[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(6): 405-418.
[7] Ngoc-Anh Do, Daniel Dias, Pierpaolo Oreste. Three-dimensional numerical simulation of mechanized twin stacked tunnels in soft ground[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(11): 896-913.
[8] Hai-bo Huo, Yi Ji, Xin-jian Zhu, Xing-hong Kuang, Yu-qing Liu. Control-oriented dynamic identification modeling of a planar SOFC stack based on genetic algorithm-least squares support vector regression[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(10): 829-839.
[9] Jian-guo Yang, Xiao-long Zhang, Hong Zhao, Li Shen. Non-linear relationship between combustion kinetic parameters and coal quality[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(5): 344-352.
[10] Fu Huang, Xiao-li Yang, Lian-heng Zhao. Upper bound solution of supporting pressure for a shallow square tunnel based on the Hoek-Brown failure criterion[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(4): 284-292.
[11] Wan-huan Zhou, Ren-peng Chen, Lin-shuang Zhao, Zheng-zhong Xu, Yun-min Chen. A semi-analytical method for the analysis of pile-supported embankments[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(11): 888-894.
[12] Bao-gui Qiu, Jun-xia Jiang, Ying-lin Ke. A new principle and device for large aircraft components gaining accurate support by ball joint[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(5): 405-414.
[13] Guo-liang Xiong, Long Zhang, He-sheng Liu, Hui-jun Zou, Wei-zhong Guo. A comparative study on ApEn, SampEn and their fuzzy counterparts in a multiscale framework for feature extraction[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(4): 270-279.
[14] Xin LIU, Guo WEI, Jin-wei SUN, Dan LIU. Nonlinear multifunctional sensor signal reconstruction based on least squares support vector machines and total least squares algorithm[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(4): 497-503.
[15] Bing LIU, Li-chao ZHANG, Jian-hua MO, Bo QIAN. New method of improving parts accuracy by adding heat balance support in selective laser sintering[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(3): 361-369.