Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2013, Vol. 14 Issue (12): 867-879    DOI: 10.1631/jzus.A1300225
Civil and Mechanical Engineering     
Analytical study on the dynamic displacement response of a curved track subjected to moving loads
Ke-fei Li, Wei-ning Liu, Valeri Markine, Zhi-wei Han
School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China; Beijing MTR Construction Administration Corporation, Beijing 100037, China; Railway Engineering Group, Faculty of Civil Engineering and Geosciences, Delft University of Technology, the Netherlands
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  A closed-form out-of-plane dynamic displacement response of a curved track subjected to moving loads was proposed. The track structure was modeled as a planar curved Timoshenko beam periodically supported by the double-layer spring-damping elements. The general dynamic displacement response induced by the moving loads along the curve on the elastic semi-infinite space was firstly obtained in the frequency domain, according to the Duhamel integral and the dynamic reciprocity theorem. In the case of the periodic curved track structure subjected to moving loads, the dynamic displacement equation was simplified into a form of summation within the basic track cell instead of the integral. The transfer function for the curved track was expressed in the form of a transfer matrix. Single and series moving loads were involved in the calculation program. For the verification of the analytical model, the mid-span vertical deflection of a simply support curved beam subjected to moving load was recalculated and compared with the same case in the reference. The research results indicate that: under the same moving loads, the displacement response of the curved track decreases slightly with the increasing track radius, and the displacement response of the curved track with the radius greater than or equal to 600 m is almost equivalent to the displacement response of the straight track; the frequency spectrum of the curved track is more abundant than that of the straight track, which may result in more wheel-rail resonance and rail corrugation in the curved lines.

Key wordsCurved track      Moving loads      Dynamic displacement      Analytical solution      Transfer function     
Received: 01 July 2013      Published: 03 December 2013
CLC:  U211.3  
Cite this article:

Ke-fei Li, Wei-ning Liu, Valeri Markine, Zhi-wei Han. Analytical study on the dynamic displacement response of a curved track subjected to moving loads. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(12): 867-879.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A1300225     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2013/V14/I12/867

[1] Xiang-dong Hu, Wang Guo, Luo-yu Zhang, Jin-tai Wang, Xue Dong. Mathematical models of steady-state temperature fields produced by multi-piped freezing[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(9): 702-723.
[2] Peng-fei Li, Qian Fang, Ding-li Zhang. Analytical solutions of stresses and displacements for deep circular tunnels with liners in saturated ground[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(6): 395-404.
[3] Zhen-dong Shan, Dao-sheng Ling, Hao-jiang Ding. Analytical solution for 1D consolidation of unsaturated soil with mixed boundary condition[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(1): 61-70.
[4] Mohammad Mohsen Shahmardan, Mahmood Norouzi, Mohammad Hassan Kayhani, Amin Amiri Delouei. An exact analytical solution for convective heat transfer in rectangular ducts[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(10): 768-781.
[5] Chang-guang ZHANG, Qing-he ZHANG, Jun-hai ZHAO, Fei XU, Chuang-zhou WU. Unified analytical solutions for a circular opening based on non-linear unified failure criterion[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(2): 71-79.
[6] Ji YING, Chao-feng LÜ, C. W. LIM. 3D thermoelasticity solutions for functionally graded thick plates[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(3): 327-336.
[7] Ji YING, Hui-ming WANG. Magnetoelectroelastic fields in rotating multiferroic composite cylindrical structures[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(3): 319-326.
[8] HUANG De-jin, DING Hao-jiang, CHEN Wei-qiu. Analytical solution for functionally graded anisotropic cantilever beam under thermal and uniformly distributed load[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(9): 1351-1355.
[9] CHEN Jiang-ying, CHEN Wei-qiu. 3D analytical solution for a rotating transversely isotropic annular plate of functionally graded materials[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(7): 1038-1043.
[10] XIE Kang-he, QI Tian, DONG Ya-qin. Nonlinear analytical solution for one-dimensional consolidation of soft soil under cyclic loading[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(8 ): 10-.
[11] XIE Kang-he, WEN Jie-bang, XIA Jian-zhong. Solution to 1-D consolidation of non-homogeneous soft clay[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(Supplement 1): 29-34.
[12] DING Hao-jiang, HUANG De-jin, WANG Hui-ming. Analytical solution for fixed-end beam subjected to uniform load[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(8): 779-783.
[13] JIANG Ai-min, DING Hao-jiang. The analytical solutions for orthotropic cantilever beams (I): Subjected to surface forces[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(2): 126-131.
[14] ZHUANG Ying-chun, XIE Kang-he. Study on one-dimensional consolidation of soil under cyclic loading and with varied compressibility[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(2): 141-147.
[15] DING Hao-jiang, LEE Xiang-yu, CHEN Wei-qiu. Analytical solutions for a uniformly loaded circular plate with clamped edges[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(10): 26-.