Please wait a minute...
ZJUS-A
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2007, Vol. 8 Issue (3 ): 15-    DOI: 10.1631/jzus.2007.A0426
    
Method of reliability tolerance design based on EDA technology and its application on DC hybrid contactor
WANG Shu-juan, SHA You-tao, ZHANG Hui, ZHAI Guo-fu
School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Tolerance design, including tolerance analysis and distribution, is an important part of the electronic system’s reliability design. The traditional design needs to construct mathematic model of material circuit, which involves large amount of workload and lacks of practicability. This paper discusses the basic theory of electronic system’s reliability tolerance design and presents a new design method based on EDA (Electronic Design Automatic) software. This method has been validated through the application research on reliability tolerance design of the DC hybrid contactor’s control circuit.

Key words： Reliability      Tolerance analysis      EDA (Electronic Design Automatic)     
Received: 19 December 2006     
CLC:  TP391.7  
  TP202  
  TP302.7  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
WANG Shu-juan
SHA You-tao
ZHANG Hui
ZHAI Guo-fu
Cite this article:

WANG Shu-juan, SHA You-tao, ZHANG Hui, ZHAI Guo-fu. Method of reliability tolerance design based on EDA technology and its application on DC hybrid contactor. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(3 ): 15-.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2007.A0426     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2007/V8/I3 /15

[1] Cao Wang, Quan-wang Li, Long Pang, A-ming Zou. Estimating the time-dependent reliability of aging structures in the presence of incomplete deterioration information[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(9): 677-688.
[2] Cheng-ming Lan , Hui Li, Jun-Yi Peng , Dong-Bai Sun . A structural reliability-based sensitivity analysis method using particles swarm optimization: relative convergence rate[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(12): 961-973.
[3] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[4] Cao Wang, Quan-wang Li, A-ming Zou, Long Zhang. A realistic resistance deterioration model for time-dependent reliability analysis of aging bridges[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(7): 513-524.
[5] Antoine Dumas, Jean-Yves Dantan, Nicolas Gayton, Thomas Bles, Robin Loebl. An iterative statistical tolerance analysis procedure to deal with linearized behavior models[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(5): 353-360.
[6] Philipp Ziegler, Sandro Wartzack. A statistical method to identify main contributing tolerances in assemblability studies based on convex hull techniques[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(5): 361-370.
[7] Satoru Sone. Comparison of the technologies of the Japanese Shinkansen and Chinese High-speed Railways[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 769-780.
[8] P. W. Chan, Y. F. Lee. Performance of LIDAR- and radar-based turbulence intensity measurement in comparison with anemometer-based turbulence intensity estimation based on aircraft data for a typical case of terrain-induced turbulence in association with a typhoon[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(7): 469-481.
[9] Ping Tan, Wei-ting He, Jia Lin, Hong-ming Zhao, Jian Chu. Design and reliability, availability, maintainability, and safety analysis of a high availability quadruple vital computer system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(12): 926-935.
[10] Jian-yun Chen, Qiang Xu, Jing Li, Shu-li Fan. Improved response surface method for anti-slide reliability analysis of gravity dam based on weighted regression[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(6): 432-439.
[11] Lin-cong CHEN, Rong-hua HUAN, Wei-qiu ZHU. Feedback maximization of reliability of MDOF quasi integrable-Hamiltonian systems under combined harmonic and white noise excitations[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(9): 1245-1251.
[12] Juan WANG, Dan FENG, Fang WANG, Cheng-tao LU. Extending attributes page: a scheme for enhancing the reliability of storage system metadata[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(8): 1106-1113.
[13] Xiao-hui TAN, Jian-guo WANG. Finite element reliability analysis of slope stability[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(5): 645-652.
[14] Mojtaba VALINATAJ, Siamak MOHAMMADI, Saeed SAFARI. Reliability assessment of networks-on-chip based on analytical models[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(12): 1801-1814.
[15] Xun ZHOU, Xiao-li YU. Fatigue crack growth rate test using a frequency sweep method[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(3): 346-350.