Please wait a minute...
FITEE
Front. Inform. Technol. Electron. Eng.  2015, Vol. 16 Issue (1): 79-84    DOI: 10.1631/FITEE.1400149
    
新型三维腹腔镜系统的设计与标定
Jia Tang, Li-qiang Wang, Bo Yuan, Hong Jiang, Qi-ming Zhu
State Key Laboratory of Modern Optical Instrumentation, Optical Engineering Department, Zhejiang University, Hangzhou 310027, China
Design and calibration of a new high-definition three-dimensional laparoscopic system
Jia Tang, Li-qiang Wang, Bo Yuan, Hong Jiang, Qi-ming Zhu
State Key Laboratory of Modern Optical Instrumentation, Optical Engineering Department, Zhejiang University, Hangzhou 310027, China
 全文: PDF 
摘要： 目的：为简化三维腹腔镜结构，同时保证其成像和3D视频质量，研发一种新型高清三维腹腔镜系统。
创新：采用双光学通道，使用中继透镜延长图像光学传输距离，在中继透镜末端用两个相机接收内窥图像，简化腹腔镜结构，并保证了成像质量。
方法：首先，根据图像传感器参数和视场需求大小确定内窥镜光学系统的有效焦距，在此基础上设计包括中继透镜在内的双通道光学镜头（图1）。其次，设计CCU用于采集和处理双通道高清视频图像，并通过HDMI输出将它们同时显示在3D显示器上，由此构建了高清三维腹腔镜系统（图4）。最后，针对双目内窥镜系统采用传统针孔模型计算距离存在较大误差的问题，通过理论分析提出一种新的距离计算方法，并在0-150 mm范围内的距离测量实验中验证该算法的有效性（图3）。
结论：新型三维腹腔镜在保证成像质量的基础上简化了系统结构；采用提出的双目系统距离计算方法可以有效提高双目内窥系统的测距精度。
关键词： 双光学通道;  三维;  相机标定;  深度测量;  腹腔镜系统    
Abstract: We present a high-definition (HD) 3D laparoscopic system including a dual channel optical system, two cameras, a camera control unit (CCU), and an HD 3D monitor. This laparoscopic system is capable of outputting dual high-definition videos and providing vivid 3D images. A modified pinhole camera model is used for camera calibration and a new method of depth measurement to improve precision. The average error of depth measurement measured by experiment (about 1.13 mm) was small in proportion to the large range in distance of the system (10–150 mm). The new method is applicable to any calibrated binocular vision system.
Key words: Dual optical channels    Three dimensional    Camera calibration    Pinhole model    Depth measurement    Laparoscopic system
收稿日期: 2014-04-22 出版日期: 2014-12-23
CLC:  TP391  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
Jia Tang
Li-qiang Wang
Bo Yuan
Hong Jiang
Qi-ming Zhu

引用本文:

Jia Tang, Li-qiang Wang, Bo Yuan, Hong Jiang, Qi-ming Zhu. Design and calibration of a new high-definition three-dimensional laparoscopic system. Front. Inform. Technol. Electron. Eng., 2015, 16(1): 79-84.

链接本文:

http://www.zjujournals.com/xueshu/fitee/CN/10.1631/FITEE.1400149    或    http://www.zjujournals.com/xueshu/fitee/CN/Y2015/V16/I1/79

[1] Xiao-ming Gou, Zhi-wen Liu, Wei Liu, You-gen Xu. 三元数域自适应滤波与跟踪算法[J]. Front. Inform. Technol. Electron. Eng., 2016, 17(8): 834-840.
[2] Jing-fa Liu, Juan Huang, Gang Li, Wen-jie Liu, Ting-zhao Guan, Liang Hao. 一种基于新的势能曲面变平的卫星舱布局问题的启发式方法[J]. Front. Inform. Technol. Electron. Eng., 2016, 17(10): 1031-1043.
[3] Xiao-fang Huang, Shou-qian Sun, Ke-jun Zhang, Tian-ning Xu, Jian-feng Wu, Bin Zhu. 一种皮影人物建模及动画生成方法[J]. Front. Inform. Technol. Electron. Eng., 2015, 16(5): 367-379.
[4] Xiao Liu, Jia-min Liu, An-xi Cao, Zhuang-le Yao. 一种新型三维不规则排样构造算法HAPE3D[J]. Front. Inform. Technol. Electron. Eng., 2015, 16(5): 380-390.
[5] Yong-zhao Zhan, Yan-ting Li, Xin-yu Wang, Yi Qian. 基于模型顶点曲率的三维网格盲水印算法[J]. Front. Inform. Technol. Electron. Eng., 2014, 15(5): 351-362.