Please wait a minute...
FITEE
Front. Inform. Technol. Electron. Eng.  2014, Vol. 15 Issue (8): 651-663    DOI: 10.1631/jzus.C1300360
    
基于交叉耦合方法的双轴气动伺服系统自适应鲁棒同步控制研究
De-yuan Meng, Guo-liang Tao, Ai-min Li, Wei Li
School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China; State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
Motion synchronization of dual-cylinder pneumatic servo systems with integration of adaptive robust control and cross-coupling approach
De-yuan Meng, Guo-liang Tao, Ai-min Li, Wei Li
School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China; State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF 
摘要： 研究目的：多轴气动伺服系统因具有功率-质量比大、清洁、价格低、结构简单、易维护等优点，在机器人、工业自动化、医疗机械等领域具有广泛应用前景。但是，该系统具有很多不利于精确控制的缺点，如强非线性、参数时变性、模型不确定性等。本文针对双缸气动伺服系统，从建立系统模型入手，探寻同时实现单气缸高精度轨迹跟踪控制和双气缸高精度位置同步的控制策略，旨在为这项技术的工业实用化奠定基础。
创新要点：提出了一种基于交叉耦合方法的自适应鲁棒气动同步控制策略，既保证了多气缸精确同步，又实现了系统中每一气缸的高精度运动轨迹跟踪控制。
方法提亮：将交叉耦合思想与直接/间接集成自适应鲁棒控制结合起来，提出一种基于交叉耦合方法的自适应鲁棒气动同步控制策略。将同步误差直接反馈至每个轴控制器的输入端而非输出端，利用交叉耦合方法将同步误差和轨迹跟踪误差组成耦合误差，基于该新误差变量设计自适应鲁棒控制器。控制器由在线最小二乘参数估计和基于反步法设计的非线性鲁棒控制器组成，前者用于减小模型中的参数不确定性，后者用于抑制参数估计误差、未建模动态和干扰的影响，使得单缸的轨迹跟踪误差和多缸间的同步误差同时收敛，既保证多气缸精确同步又不影响系统中每一气缸的轨迹跟踪控制精度。
重要结论：实验结果表明，该控制器能实现很高的同步位置控制精度，对干扰具有较强的鲁棒性。
关键词： 运动同步;  气动伺服系统;  交叉耦合;  自适应鲁棒控制    
Abstract: We investigate motion synchronization of dual-cylinder pneumatic servo systems and develop an adaptive robust synchronization controller. The proposed controller incorporates the cross-coupling technology into the integrated direct/indirect adaptive robust control (DIARC) architecture by feeding back the coupled position errors, which are formed by the trajectory tracking errors of two cylinders and the synchronization error between them. The controller employs an online recursive least squares estimation algorithm to obtain accurate estimates of model parameters for reducing the extent of parametric uncertainties, and uses a robust control law to attenuate the effects of parameter estimation errors, unmodeled dynamics, and disturbances. Therefore, asymptotic convergence to zero of both trajectory tracking and synchronization errors can be guaranteed. Experimental results verify the effectiveness of the proposed controller.
Key words: Motion synchronization    Pneumatic servo system    Cross-coupling    Adaptive robust control
收稿日期: 2013-12-11 出版日期: 2014-08-06
CLC:  TP202  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
De-yuan Meng
Guo-liang Tao
Ai-min Li
Wei Li

引用本文:

De-yuan Meng, Guo-liang Tao, Ai-min Li, Wei Li. Motion synchronization of dual-cylinder pneumatic servo systems with integration of adaptive robust control and cross-coupling approach. Front. Inform. Technol. Electron. Eng., 2014, 15(8): 651-663.

链接本文:

http://www.zjujournals.com/xueshu/fitee/CN/10.1631/jzus.C1300360    或    http://www.zjujournals.com/xueshu/fitee/CN/Y2014/V15/I8/651

[1] Guo-liang Tao, Ce Shang, De-yuan Meng, Chao-chao Zhou. 含参数初值整定和自适应鲁棒方法的3-RPS气动并联平台位姿控制[J]. Frontiers of Information Technology & Electronic Engineering, 2017, 18(3): 303-316.
[2] Guo-liang Tao, Ce Shang, De-yuan Meng, Chao-chao Zhou. 含参数初值整定和自适应鲁棒方法的3-RPS气动并联平台位姿控制[J]. Frontiers of Information Technology & Electronic Engineering, 2017, 18(3): 303-316.