Please wait a minute...
FITEE
Front. Inform. Technol. Electron. Eng.  2015, Vol. 16 Issue (10): 848-857    DOI: 10.1631/FITEE.1500011
    
基于故障演化-测试相关性可测性建模方法
Xiao-dong Tan, Jian-lu Luo, Qing Li, Bing Lu, Jing Qiu
1Department of Electronic Technology, Officers College of PAP, Chengdu 610213, China; 2Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha 410073, China
Fault evolution-test dependency modeling for mechanical systems
Xiao-dong Tan, Jian-lu Luo, Qing Li, Bing Lu, Jing Qiu
1Department of Electronic Technology, Officers College of PAP, Chengdu 610213, China; 2Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha 410073, China
 全文: PDF 
摘要： 目的：建立系统中典型故障演化过程中的相关参数与系统中测试节点的关联关系。分析系统对故障的检测、隔离，对故障演化过程跟踪和对故障预测能力的可测性水平，进而指导系统的可测性设计。
创新点：通过故障-征兆、征兆-测试矩阵描述系统故障演化与测试的相关性关系。结合测试节点的灵敏度、检测时间、检测概率等固有属性，建立量化测试对故障演化过程跟踪能力的指标，在故障检测率、故障隔离率等指标基础上，提出故障可跟踪率和故障可预测率的可测性指标。
方法：首先，分析系统中典型故障的演化机理，建立定量描述故障与表征其严重程度的征兆参数的相关性矩阵。其次，使用能量流图分析方法，建立征兆参数与系统中测试节点间的能量传递关系，进而获得征兆参数与测试间的动力学关系。再次，构建衡量系统对故障可检测、可隔离、可跟踪和预测的可测性指标体系，并提出相应的可测性指标预计方法。最后，以某离心泵系统为案例，对本文所提理论的有效性进行验证。
结论：基于故障演化-测试相关性可测性建模方法能定性地描述系统中故障与表征其严重程度的征兆参数间的关系，并能从定量的角度建立各个征兆参数与系统中测试节点的关系。故障可跟踪率和故障可预测率能较好地描述系统中固有测试节点对故障跟踪和预测的水平，以此为基础提出的可测性预计方法能有效预计系统对故障的检测、隔离、跟踪和预测水平，预计结果能有效指导系统的可测性设计。论文的相关理论和方法对于提高系统对故障的跟踪和对故障的预测的可测性水平具有指导意义。
关键词： 机械系统;  可测性设计;  故障演化-测试相关性模型    
Abstract: Tracking the process of fault growth in mechanical systems using a range of tests is important to avoid catastrophic failures. So, it is necessary to study the design for testability (DFT). In this paper, to improve the testability performance of mechanical systems for tracking fault growth, a fault evolution-test dependency model (FETDM) is proposed to implement DFT. A testability analysis method that considers fault trackability and predictability is developed to quantify the testability performance of mechanical systems. Results from experiments on a centrifugal pump show that the proposed FETDM and testability analysis method can provide guidance to engineers to improve the testability level of mechanical systems.
Key words: Mechanical systems    Design for testability (DFT)    Fault evolution-test dependency model (FETDM)
收稿日期: 2015-01-09 出版日期: 2015-10-08
CLC:  TP277  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
Xiao-dong Tan
Jian-lu Luo
Qing Li
Bing Lu
Jing Qiu

引用本文:

Xiao-dong Tan, Jian-lu Luo, Qing Li, Bing Lu, Jing Qiu. Fault evolution-test dependency modeling for mechanical systems. Front. Inform. Technol. Electron. Eng., 2015, 16(10): 848-857.

链接本文:

http://www.zjujournals.com/xueshu/fitee/CN/10.1631/FITEE.1500011    或    http://www.zjujournals.com/xueshu/fitee/CN/Y2015/V16/I10/848

[1] Shi-jin Ren, Yin Liang, Xiang-jun Zhao, Mao-yun Yang. 一种融合贝叶斯推理与LDRSKM的多模态过程监测算法[J]. Front. Inform. Technol. Electron. Eng., 2015, 16(8): 617-633.
[2] Rong Zou, Zhen-ying Xu, Jin-yang Li, Fu-qiang Zhou. 铁路货车闸瓦钎故障的实时监控[J]. Front. Inform. Technol. Electron. Eng., 2015, 16(3): 191-204.
[3] Yu-ming Liu, Lu-bin Ye, Ping-you Zheng, Xiang-rong Shi, Bin Hu, Jun Liang. Multiscale classification and its application to process monitoring[J]. Front. Inform. Technol. Electron. Eng., 2010, 11(6): 425-434.