Please wait a minute...
FITEE
Front. Inform. Technol. Electron. Eng.  2013, Vol. 14 Issue (1): 1-10    DOI: 10.1631/jzus.C1200229
    
Hardware design of a localization system for staff in high-risk manufacturing areas
Rui-rong Wang, Rong-rong Ye, Cui-fei Xu, Jian-zhong Wang, An-ke Xue
Institute of Information and Control, Hangzhou Dianzi University, Hangzhou 310018, China
Hardware design of a localization system for staff in high-risk manufacturing areas
Rui-rong Wang, Rong-rong Ye, Cui-fei Xu, Jian-zhong Wang, An-ke Xue
Institute of Information and Control, Hangzhou Dianzi University, Hangzhou 310018, China
 全文: PDF 
摘要： In this paper, we propose a hardware design for an effective real time indoor localization system for staff working in high-risk manufacturing areas. Because of the special requirements of our system, the chirp spread spectrum (CSS) is the most suitable indoor localization technology. The details of the new localization system are described. The system involves several anchors, tags, and a gateway, all of which use the nanoLOC TRX transceiver (NA5TR1) RF chip (Nanotron Co., Germany), which is based on the CSS technology. To validate the effectiveness of our system, both ranging and localization tests were carried out. The difference between the ranging accuracy indoors and outdoors was small. The localization system can position indoor mobile staff precisely, enabling the establishment of an emergency rescue mechanism.
关键词： Wireless indoor localization;  High-risk manufacturing area;  Chirp spread spectrum (CSS);  NanoLOC TRX transceiver (NA5TR1)    
Abstract: In this paper, we propose a hardware design for an effective real time indoor localization system for staff working in high-risk manufacturing areas. Because of the special requirements of our system, the chirp spread spectrum (CSS) is the most suitable indoor localization technology. The details of the new localization system are described. The system involves several anchors, tags, and a gateway, all of which use the nanoLOC TRX transceiver (NA5TR1) RF chip (Nanotron Co., Germany), which is based on the CSS technology. To validate the effectiveness of our system, both ranging and localization tests were carried out. The difference between the ranging accuracy indoors and outdoors was small. The localization system can position indoor mobile staff precisely, enabling the establishment of an emergency rescue mechanism.
Key words: Wireless indoor localization    High-risk manufacturing area    Chirp spread spectrum (CSS)    NanoLOC TRX transceiver (NA5TR1)
收稿日期: 2012-07-21 出版日期: 2013-01-03
CLC:  TP23  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
Rui-rong Wang
Rong-rong Ye
Cui-fei Xu
Jian-zhong Wang
An-ke Xue

引用本文:

Rui-rong Wang, Rong-rong Ye, Cui-fei Xu, Jian-zhong Wang, An-ke Xue. Hardware design of a localization system for staff in high-risk manufacturing areas. Front. Inform. Technol. Electron. Eng., 2013, 14(1): 1-10.

链接本文:

http://www.zjujournals.com/xueshu/fitee/CN/10.1631/jzus.C1200229    或    http://www.zjujournals.com/xueshu/fitee/CN/Y2013/V14/I1/1

[1] Jie Chen, Can-jun Yang, Jens Hofschulte, Wan-li Jiang, Cha Zhang. 基于光学摄像系统和惯性传感器数据融合的机器人运动跟踪系统[J]. Front. Inform. Technol. Electron. Eng., 2014, 15(7): 574-583.
[2] Ming Tang, Chang-sheng Zhu, Jie Yu. Self-sensing active magnetic bearing using real-time duty cycle[J]. Front. Inform. Technol. Electron. Eng., 2013, 14(8): 600-611.