Please wait a minute...
Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology)  2013, Vol. 14 Issue (11): 1013-1024    DOI: 10.1631/jzus.B1300034
Articles     
Improvement of enamel bond strengths for conventional and resin-modified glass ionomers: acid-etching vs. conditioning
Ling Zhang, Tian Tang, Zhen-liang Zhang, Bing Liang, Xiao-miao Wang, Bai-ping Fu
Hospital of Stomatology Affiliated to Zhejiang University School of Medicine, Hangzhou 310006, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Objective: This study deals with the effect of phosphoric acid etching and conditioning on enamel micro-tensile bond strengths (μTBSs) of conventional and resin-modified glass ionomer cements (GICs/RMGICs). Methods: Forty-eight bovine incisors were prepared into rectangular blocks. Highly-polished labial enamel surfaces were either acid-etched, conditioned with liquids of cements, or not further treated (control). Subsequently, two matching pre-treated enamel surfaces were cemented together with one of four cements [two GICs: Fuji I (GC), Ketac Cem Easymix (3M ESPE); two RMGICs: Fuji Plus (GC), RelyX Luting (3M ESPE)] in preparation for μTBS tests. Pre-treated enamel surfaces and cement-enamel interfaces were analyzed by scanning electron microscopy (SEM). Results: Phosphoric acid etching significantly increased the enamel μTBS of GICs/RMGICs. Conditioning with the liquids of the cements produced significantly weaker or equivalent enamel μTBS compared to the control. Regardless of etching, RMGICs yielded stronger enamel μTBS than GICs. A visible hybrid layer was found at certain enamel-cement interfaces of the etched enamels. Conclusions: Phosphoric acid etching significantly increased the enamel μTBSs of GICs/RMGICs. Phosphoric acid etching should be recommended to etch the enamel margins before the cementation of the prostheses such as inlays and onlays, using GICs/RMGICs to improve the bond strengths. RMGICs provided stronger enamel bond strength than GICs and conditioning did not increase enamel bond strength.

Key wordsGlass ionomer cements      Surface treatments      Bovine enamels      Scanning electron microscopy (SEM)      Micro-tensile bond strengths     
Received: 29 January 2013      Published: 04 November 2013
CLC:  R783.3  
Cite this article:

Ling Zhang, Tian Tang, Zhen-liang Zhang, Bing Liang, Xiao-miao Wang, Bai-ping Fu. Improvement of enamel bond strengths for conventional and resin-modified glass ionomers: acid-etching vs. conditioning. Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology), 2013, 14(11): 1013-1024.

URL:

http://www.zjujournals.com/xueshu/zjus-b/10.1631/jzus.B1300034     OR     http://www.zjujournals.com/xueshu/zjus-b/Y2013/V14/I11/1013

[1] Mu-zi Li, Jin-rui Wang, Hong Liu, Xia Wang, Kang Gan, Xiu-ju Liu, De-li Niu, Xiao-qing Song. Effects of light curing modes and ethanol-wet bonding on dentin bonding properties[J]. Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology), 2016, 17(9): 703-711.